New member of the family
Thread Starter
Senior Member
Joined: Feb 2002
Posts: 269
Likes: 0
From: Henderson, NV
Alabaster White C230K Grey Int. and 2003 C32 pewter/charcoal gray
New member of the family
I adopted a a used c32 into my family....now I have series of questions. How can I program the garrage opener if I have a rolling code? Does the sunroof completely close witha one touch of the button...cause my sunroof wont close completely it will stop about 1/3 on the way.
Thanks for the help
Thanks for the help
Thread Starter
Senior Member
Joined: Feb 2002
Posts: 269
Likes: 0
From: Henderson, NV
Alabaster White C230K Grey Int. and 2003 C32 pewter/charcoal gray
This is what I did. I programmed the remote to my homelink button. (i know I have a rolling code) then I open the garrage door operner box and pressed the learning button. Within 30 seconds I pressed teh homelink button I wanted to open the door. The light on the garrage door opener blinked once.
***None of these worked***
***None of these worked***
Senior Member
Joined: Oct 2006
Posts: 251
Likes: 0
From: Seattle
2003 C32
I have the same problem - did you follow the instructions in the manual precisely? the sequence has to be done twice.
When pressing the button in the car, press firmly (for 1-2 seconds)
Took me about 3 tries to get it programmed. I wasn't about to program the other 2 buttons for redundancy
When pressing the button in the car, press firmly (for 1-2 seconds)
Took me about 3 tries to get it programmed. I wasn't about to program the other 2 buttons for redundancy
Member
Joined: Nov 2005
Posts: 144
Likes: 0
From: Las Vegas
03 w203
This is a pretty difficult task to do. I'm in a 03 w203 and it took me a few times to program. I was told you can call roadside and they can assist you in doing so. That's if you want to go that route.
