For those who still have the "V6 kompressor" badge, I need to ask for a big favor.
09-27-2002, 03:59 AM
#1
MBworld Guru
Thread Starter
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
For those who still have the "V6 kompressor" badge, I need to ask for a big favor.
can you guys make some measurement of how far is the gap between the badge and the side trim. how far is the gap between the badge and the front door. For both side.
thanks a lot. I'm trying to put the "V6 kompressor" badge back onto the car.
thanks a lot. I'm trying to put the "V6 kompressor" badge back onto the car.
09-27-2002, 11:46 AM
#3
Member
Join Date: Aug 2002
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
2002 C32
Hi Frank,
Hope this helps:
For the passenger's side:
First Reference:
From the fender towards the wheel well opening: 2.5cm to the left top of the ''V''.
Second Refereence:
From the upper crease line in the slot that accepts the side moulding, 7 cm up to the bottom of the ''V''
fender crease line___________________ Up 7cm from here
Mouldingxxxxxxxxxxxxxxxxxxxx
MouldingXXXXXXXXXXXXXXXXX
Mouldingxxxxxxxxxxxxxxxxxxxx
Fender cease line ___________________
Third Reference:
Fron the furtherest point of the top of the last ''R'' in compressor 7.1 cm to the wheel well opening.
__________________________________________________ __
For the driver's side:
From the fender towards the wheel well opening: 3.4cm to the top of the ''R'.
Second Refereence:
From the upper crease line in the slot that accepts the side moulding, 7 cm up to the bottom of the ''R''
fender crease line___________________ Up 7cm from here
Mouldingxxxxxxxxxxxxxxxxxxxx
MouldingXXXXXXXXXXXXXXXXX
Mouldingxxxxxxxxxxxxxxxxxxxx
Fender cease line ___________________
Third Reference:
Fron the furtherest point of the top of the ''V'' 7.1cm to the wheel well opening.
Hope this helps:
For the passenger's side:
First Reference:
From the fender towards the wheel well opening: 2.5cm to the left top of the ''V''.
Second Refereence:
From the upper crease line in the slot that accepts the side moulding, 7 cm up to the bottom of the ''V''
fender crease line___________________ Up 7cm from here
Mouldingxxxxxxxxxxxxxxxxxxxx
MouldingXXXXXXXXXXXXXXXXX
Mouldingxxxxxxxxxxxxxxxxxxxx
Fender cease line ___________________
Third Reference:
Fron the furtherest point of the top of the last ''R'' in compressor 7.1 cm to the wheel well opening.
__________________________________________________ __
For the driver's side:
From the fender towards the wheel well opening: 3.4cm to the top of the ''R'.
Second Refereence:
From the upper crease line in the slot that accepts the side moulding, 7 cm up to the bottom of the ''R''
fender crease line___________________ Up 7cm from here
Mouldingxxxxxxxxxxxxxxxxxxxx
MouldingXXXXXXXXXXXXXXXXX
Mouldingxxxxxxxxxxxxxxxxxxxx
Fender cease line ___________________
Third Reference:
Fron the furtherest point of the top of the ''V'' 7.1cm to the wheel well opening.
09-27-2002, 07:39 PM
#6
MBworld Guru
Thread Starter
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
Ben, just to let you know, those guys from the dealer are complete morons. I was already there once this wednesday. They put the badge on, but it was WAY to high. So, i have the service consultant ordered a new one, and take off the messed up badge. The badge is free from the beginning, because they ask me to bring in the survey from MBUSA to them. You're probably thinking that I should've not remove the badge at the beginning, but hey, at least what the car would look like without the badge 
Franco, thank you so much for the info. I've saved it as a word file, and going to print it out the next time i'm going to the dealer.
Roozy, i can't see your picture. Can u post it again?
Franco, thank you so much for the info. I've saved it as a word file, and going to print it out the next time i'm going to the dealer.
Roozy, i can't see your picture. Can u post it again?
09-27-2002, 08:27 PM
#7
MBWorld Fanatic!
Join Date: Mar 2002
Location: NY/NJ
Posts: 2,596
Likes: 0
Received 0 Likes
on
0 Posts
Frank, go here and click on the C32 pics...
http://www.pbase.com/yogo/c32
This is what he was trying to show you.
http://www.pbase.com/image/5085095
http://www.pbase.com/yogo/c32
This is what he was trying to show you.
http://www.pbase.com/image/5085095
