Dyno appointment on May 29th, 2007
Thread Starter
Senior Member
Joined: Oct 2006
Posts: 464
Likes: 0
From: Miami, FL
02 C32 AMG sold!
Dyno appointment on May 29th, 2007
Well guys I'm heading to a Mustang dyno at 8am at MAK
Performance in Hialeah and to a Dynojet at 11am at Lujan
Motorsports in Doral. If anyone wants to meet up PM me or just
meet me there. I want to see if my C32 gained anything with
the mods I've done to it.
Happy Motoring,
Rey
Performance in Hialeah and to a Dynojet at 11am at Lujan
Motorsports in Doral. If anyone wants to meet up PM me or just
meet me there. I want to see if my C32 gained anything with
the mods I've done to it.
Happy Motoring,
Rey
Thread Starter
Senior Member
Joined: Oct 2006
Posts: 464
Likes: 0
From: Miami, FL
02 C32 AMG sold!
Well thanks to Erick (1FASTC32) for the instructions so I can
put my C32 into dyno mode:
To Dyno your C32, you will need to do the following:
1. To start, the key must be removed from the ignition.
2. Insert the key and turn to position 1.
3. Immediately press and hold the trip odometer reset button until the instrument cluster beeps. There is no visual message, only an audio beep. Be patient, this takes around 40 seconds.
4. Press the lower menu button (it looks like two sheets of paper, the one with the writing in the background behind the blank one)
5. Press the up arrow button.
6. Press the "+" sign to disable the Traction System (turn "ON" test mode)
7. Start the engine, the traction system is now disabled.
To return to normal, remove the key and restart the engine. The traction control warning should no longer be in the cluster. If it is, shut the engine off and remove the key again. Then insert the key and turn to position 1. Note that the DYNO test screen is displayed immediately. Push the "-" button to enable the traction system (turn "OFF" test mode)
NOTE: When you first turn the key to position 1, ESP DYNO Test screen pops up, then after 1-2 seconds it may disappear while faults are displayed. If you weren't fast enough in pressing the "-" button before codes were displayed, just wait until all codes cycle by, then the ESP DYNO Test screen will reappear.
No, this doesn't work for any car but the 203, before you ask.
Enjoy, and I'm not buying you new tires!
On cars equipped with Command, to enter the diagnostic screen press and hold the following keys for about 8 seconds: Mute + 1 + 3
erick
And here's a video of what it looks like, didn't get to dyno it
because I did it in front of my house, wouldn't want the C32
1/2 way into my house
http://www.youtube.com/watch?v=JMJEg_XV_Ic
put my C32 into dyno mode:
Originally Posted by 1FASTC32
To Dyno your C32, you will need to do the following:
1. To start, the key must be removed from the ignition.
2. Insert the key and turn to position 1.
3. Immediately press and hold the trip odometer reset button until the instrument cluster beeps. There is no visual message, only an audio beep. Be patient, this takes around 40 seconds.
4. Press the lower menu button (it looks like two sheets of paper, the one with the writing in the background behind the blank one)
5. Press the up arrow button.
6. Press the "+" sign to disable the Traction System (turn "ON" test mode)
7. Start the engine, the traction system is now disabled.
To return to normal, remove the key and restart the engine. The traction control warning should no longer be in the cluster. If it is, shut the engine off and remove the key again. Then insert the key and turn to position 1. Note that the DYNO test screen is displayed immediately. Push the "-" button to enable the traction system (turn "OFF" test mode)
NOTE: When you first turn the key to position 1, ESP DYNO Test screen pops up, then after 1-2 seconds it may disappear while faults are displayed. If you weren't fast enough in pressing the "-" button before codes were displayed, just wait until all codes cycle by, then the ESP DYNO Test screen will reappear.
No, this doesn't work for any car but the 203, before you ask.
Enjoy, and I'm not buying you new tires!
On cars equipped with Command, to enter the diagnostic screen press and hold the following keys for about 8 seconds: Mute + 1 + 3
erick
And here's a video of what it looks like, didn't get to dyno it
because I did it in front of my house, wouldn't want the C32
1/2 way into my house
http://www.youtube.com/watch?v=JMJEg_XV_Ic
Thread Starter
Senior Member
Joined: Oct 2006
Posts: 464
Likes: 0
From: Miami, FL
02 C32 AMG sold!
