LETMotorsports DYNO RESULTS!!!! HEADERS MAKE POWER!!!
#26
Banned
Join Date: Sep 2006
Location: Santa Barbara & Los Angeles, CA
Posts: 973
Likes: 0
Received 0 Likes
on
0 Posts
C32, Cobra, 700hp Vespa
I am not saying the test is invalid. Although, you did remove/reinstall your SC last night, so I don't put it past you that you could swap headers I know they are a total pain in the butt. Big forearms + tight space = pain.
I think the headers look great. I completely support this project. But when it comes to headers, most of us know, power under the curve is what is important. Peak horsepower looks good on a product page, but is not very useful in the real world. It sounds like the car is more fun to drive from what you have said, so I expect to see a nice bump across the whole curve.
By the way, do you have any laptop software? Do you do any road dynoing?
I think the headers look great. I completely support this project. But when it comes to headers, most of us know, power under the curve is what is important. Peak horsepower looks good on a product page, but is not very useful in the real world. It sounds like the car is more fun to drive from what you have said, so I expect to see a nice bump across the whole curve.
By the way, do you have any laptop software? Do you do any road dynoing?
#27
SPONSOR
Thread Starter
I am not saying the test is invalid. Although, you did remove/reinstall your SC last night, so I don't put it past you that you could swap headers I know they are a total pain in the butt. Big forearms + tight space = pain.
I think the headers look great. I completely support this project. But when it comes to headers, most of us know, power under the curve is what is important. Peak horsepower looks good on a product page, but is not very useful in the real world. It sounds like the car is more fun to drive from what you have said, so I expect to see a nice bump across the whole curve.
By the way, do you have any laptop software? Do you do any road dynoing?
I think the headers look great. I completely support this project. But when it comes to headers, most of us know, power under the curve is what is important. Peak horsepower looks good on a product page, but is not very useful in the real world. It sounds like the car is more fun to drive from what you have said, so I expect to see a nice bump across the whole curve.
By the way, do you have any laptop software? Do you do any road dynoing?
thanks for the props on the headers, the area under the curve has definitely improved...that is what i am more excited about than anything...the torque curve is pretty flat...
i do have laptop software for datalogging and it has a dyno feature on there, but i have not tried yet...
#28
Banned
Join Date: Sep 2006
Location: Santa Barbara & Los Angeles, CA
Posts: 973
Likes: 0
Received 0 Likes
on
0 Posts
C32, Cobra, 700hp Vespa
The stock headers. Glad to hear about the flat torque curve, thats what we want
On the software note, I love road dynoing. I found Autoenginuity to be within +/-5 hp/tq of an actual dyno.
On the software note, I love road dynoing. I found Autoenginuity to be within +/-5 hp/tq of an actual dyno.
#29
SPONSOR
Thread Starter
what gear are you doing the road dyno in? i have a software call Dynoscan...
i see what you mean about the headers, just read it wrong
#30
Banned
Join Date: Sep 2006
Location: Santa Barbara & Los Angeles, CA
Posts: 973
Likes: 0
Received 0 Likes
on
0 Posts
C32, Cobra, 700hp Vespa
I dyno in third. I think 4th would get a bit scary Here is a screen shot from the setup. You can either have the software calculate the final gear ratio it needs to make an accurate reading (by driving same speed for 30 seconds), or you can enter the rear end gear and working gear. I actually found that letting the software measure it is more accurate.
#33
SPONSOR
Thread Starter
ok guys, i ended up working on ///AMG4EVER's car all day replacing his struts and installing an LETMotorsports Heat Exchanger, so i did not have time to get to the store and buy a scanner...sorry
i will try to get access to one at my dad's this week, we are leaving in the morning to hang out there for the holiday week...Have a HAPPY THANKSGIVING!
i will try to get access to one at my dad's this week, we are leaving in the morning to hang out there for the holiday week...Have a HAPPY THANKSGIVING!
#34
Super Moderator
#37
SPONSOR
Thread Starter
#38
MBWorld Fanatic!
Erick - Thank you for the excellent customer service and VIP treatment.
The LET owner picked my car up at noon, left his car in case I needed it and by 6 pm I had it back... Later on, he followed up with a phone call to make sure everything was running smooth.
I had a customer service speech this morning to all my people here at the office.
Keep it up. Looking forward to do business again.
The LET owner picked my car up at noon, left his car in case I needed it and by 6 pm I had it back... Later on, he followed up with a phone call to make sure everything was running smooth.
I had a customer service speech this morning to all my people here at the office.
Keep it up. Looking forward to do business again.
#39
SPONSOR
Thread Starter
Erick - Thank you for the excellent customer service and VIP treatment.
The LET owner picked my car up at noon, left his car in case I needed it and by 6 pm I had it back... Later on, he followed up with a phone call to make sure everything was running smooth.
I had a customer service speech this morning to all my people here at the office.
Keep it up. Looking forward to do business again.
The LET owner picked my car up at noon, left his car in case I needed it and by 6 pm I had it back... Later on, he followed up with a phone call to make sure everything was running smooth.
I had a customer service speech this morning to all my people here at the office.
Keep it up. Looking forward to do business again.
i will be glad to do this for anyone else in the Houston area as well for any installs, just let me know! thanks!
#42
MBWorld Fanatic!
Join Date: Aug 2005
Location: Southern Cali (Ontario)
Posts: 3,466
Likes: 0
Received 10 Likes
on
10 Posts
wow.. the C32 mods are bring the C32 back to 335i levels at an economic price...
with tha power.. and some DR's.. trap 110 to 112 on a good track.
if somehow .. we can put down 370RWHP/360RWTQ.. .it would give the 335's are real run for its money.
Tuned N54's... I'm not talking stock of course.
with tha power.. and some DR's.. trap 110 to 112 on a good track.
if somehow .. we can put down 370RWHP/360RWTQ.. .it would give the 335's are real run for its money.
Tuned N54's... I'm not talking stock of course.
#45
SPONSOR
Thread Starter
#46
SPONSOR
Thread Starter
yes! we just need a 63 stock manifold and we can get some made now! why don't you ship me your car and you can have the first set of LETMotorsports Custom Headers!
#48
SPONSOR
Thread Starter
wow.. the C32 mods are bring the C32 back to 335i levels at an economic price...
with tha power.. and some DR's.. trap 110 to 112 on a good track.
if somehow .. we can put down 370RWHP/360RWTQ.. .it would give the 335's are real run for its money.
Tuned N54's... I'm not talking stock of course.
with tha power.. and some DR's.. trap 110 to 112 on a good track.
if somehow .. we can put down 370RWHP/360RWTQ.. .it would give the 335's are real run for its money.
Tuned N54's... I'm not talking stock of course.