ECU
MBWorld Fanatic!
Joined: Jun 2004
Posts: 1,140
Likes: 2
From: Ashburn, VA
2004 C32, 2006 Honda CBR1000RR, 2007 Harley NightRod, 2013 Harley Road Glide Custom
Member
Joined: Jan 2008
Posts: 233
Likes: 0
From: South Jersey
2002 C32 AMG
If you are sending the ECU to LET (recommended), they will send you directions on ECU removal. But if you don't want to wait, here you go:
On the C32 the ECU is located under the hood on the driver's side.
1) Move your wipers to the vertical position before you open the hood.
2) Remove the plastic cover and you will see the fuse box.
3) Open the fuse box and you will see the ECU next to the fender under about a hundred wires.
4) Unplug the two outside plugs, then you will be able to remove the two inner plugs.
5) Now the ECU should slide up and out (assuming the wiper linkage is not in the way
- see step 1).
On the C32 the ECU is located under the hood on the driver's side.
1) Move your wipers to the vertical position before you open the hood.
2) Remove the plastic cover and you will see the fuse box.
3) Open the fuse box and you will see the ECU next to the fender under about a hundred wires.
4) Unplug the two outside plugs, then you will be able to remove the two inner plugs.
5) Now the ECU should slide up and out (assuming the wiper linkage is not in the way
- see step 1).
SPONSOR
Joined: Mar 2006
Posts: 2,517
Likes: 1
From: Ohio
...
If you are sending the ECU to LET (recommended), they will send you directions on ECU removal. But if you don't want to wait, here you go:
On the C32 the ECU is located under the hood on the driver's side.
1) Move your wipers to the vertical position before you open the hood.
2) Remove the plastic cover and you will see the fuse box.
3) Open the fuse box and you will see the ECU next to the fender under about a hundred wires.
4) Unplug the two outside plugs, then you will be able to remove the two inner plugs.
5) Now the ECU should slide up and out (assuming the wiper linkage is not in the way - see step 1).
On the C32 the ECU is located under the hood on the driver's side.
1) Move your wipers to the vertical position before you open the hood.
2) Remove the plastic cover and you will see the fuse box.
3) Open the fuse box and you will see the ECU next to the fender under about a hundred wires.
4) Unplug the two outside plugs, then you will be able to remove the two inner plugs.
5) Now the ECU should slide up and out (assuming the wiper linkage is not in the way
- see step 1).Correct! we send exact exact instructions along with a form for you to fill out so that we can write the correct program for the modifications that you have on the vehicle...
if you have any questions, give us a call!
MBWorld Fanatic!
Joined: Jun 2004
Posts: 1,140
Likes: 2
From: Ashburn, VA
2004 C32, 2006 Honda CBR1000RR, 2007 Harley NightRod, 2013 Harley Road Glide Custom
If you are sending the ECU to LET (recommended), they will send you directions on ECU removal. But if you don't want to wait, here you go:
On the C32 the ECU is located under the hood on the driver's side.
1) Move your wipers to the vertical position before you open the hood.
2) Remove the plastic cover and you will see the fuse box.
3) Open the fuse box and you will see the ECU next to the fender under about a hundred wires.
4) Unplug the two outside plugs, then you will be able to remove the two inner plugs.
5) Now the ECU should slide up and out (assuming the wiper linkage is not in the way - see step 1).
On the C32 the ECU is located under the hood on the driver's side.
1) Move your wipers to the vertical position before you open the hood.
2) Remove the plastic cover and you will see the fuse box.
3) Open the fuse box and you will see the ECU next to the fender under about a hundred wires.
4) Unplug the two outside plugs, then you will be able to remove the two inner plugs.
5) Now the ECU should slide up and out (assuming the wiper linkage is not in the way
- see step 1).report on Friday! - then I plan to order and remove.
MBWorld Fanatic!
Joined: Feb 2006
Posts: 6,213
Likes: 8
LET C32 2002
If you are sending the ECU to LET (recommended), they will send you directions on ECU removal. But if you don't want to wait, here you go:
On the C32 the ECU is located under the hood on the driver's side.
1) Move your wipers to the vertical position before you open the hood.
2) Remove the plastic cover and you will see the fuse box.
3) Open the fuse box and you will see the ECU next to the fender under about a hundred wires.
4) Unplug the two outside plugs, then you will be able to remove the two inner plugs.
5) Now the ECU should slide up and out (assuming the wiper linkage is not in the way - see step 1).
On the C32 the ECU is located under the hood on the driver's side.
1) Move your wipers to the vertical position before you open the hood.
2) Remove the plastic cover and you will see the fuse box.
3) Open the fuse box and you will see the ECU next to the fender under about a hundred wires.
4) Unplug the two outside plugs, then you will be able to remove the two inner plugs.
5) Now the ECU should slide up and out (assuming the wiper linkage is not in the way
- see step 1).Erick from LET or it may have been Jerry sent me an email link the first time when they worked with Evotech.
