Second guessing myself on wheel fitment...
Thread Starter
Super Member
Joined: Apr 2010
Posts: 754
Likes: 10
From: Houston, TX
a car.
Second guessing myself on wheel fitment...
I've worked the numbers and really think the wheels I've picked will work. However, I'd be grateful if I could get some of you who might know better to confirm this before I make the investment. I want to install TSW Crofts on my C32 with the following specs.
http://www.rimsntires.com/wheel.jsp?...SW&model=Croft
Front: 18x8.0 5x112 ET32 or 18x8.0 5x112 ET45
Rear: 18x9.5 5x112 ET35
The calculator I used came up with the following:
1mm less inner clearance / 11mm extension for the front setup with ET32
14mm less inner clearance / 2mm retraction for the front setup with ET45
14mm less inner clearance / 12mm extension for the rear setup
I would prefer to use the ET45 configuration up front to keep the look as close to stock as possible but have no idea if there's a half inch in the wheel well to accommodate it. Any help is appreciated folks. Thanks.
http://www.rimsntires.com/wheel.jsp?...SW&model=Croft
Front: 18x8.0 5x112 ET32 or 18x8.0 5x112 ET45
Rear: 18x9.5 5x112 ET35
The calculator I used came up with the following:
1mm less inner clearance / 11mm extension for the front setup with ET32
14mm less inner clearance / 2mm retraction for the front setup with ET45
14mm less inner clearance / 12mm extension for the rear setup
I would prefer to use the ET45 configuration up front to keep the look as close to stock as possible but have no idea if there's a half inch in the wheel well to accommodate it. Any help is appreciated folks. Thanks.
