what tools do i need to change a serp belt?
11-09-2010, 06:02 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2007
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
c32
what tools do i need to change a serp belt?
my dad needs me to go down to his house and change his belt on his c32, what tools will i need. he doesnt have many tools and lives 40minutes from me, just dont want to get down there to realize he doesnt have the right tools, thanks
11-10-2010, 12:19 PM
#2
Senior Member
the tensioner can be released by a standard socket, but I do not reccomend it It strips easily. I don't remember the exact number of bit, but you'll want the T star bit (it'll be like T25, T30, etc). Do a search and you'll find it.
11-10-2010, 07:29 PM
#4
Member
On my C55, I swivel the tensioning pulley with the hex hole below the pulley in an anti-clockwise direction. A standard ratchet should work.
11-11-2010, 01:40 AM
#6
MBWorld Fanatic!
Join Date: Dec 2007
Location: Corona, CA
Posts: 5,034
Likes: 0
Received 6 Likes
on
6 Posts
03 g35 coupe...........02 c32 Sold
its suppose to be a e11 torx socket. You can use a e12. Just read the code3 pulley install instructions on the noobie sticky. Tells you everything you needs, you just swap out the belt instead of the pulley.
