MBWorld.org Forums

MBWorld.org Forums (https://mbworld.org/forums/)
-   C32 AMG, C55 AMG (W203) (https://mbworld.org/forums/c32-amg-c55-amg-w203-48/)
-   -   C55 Fuel Filter Replacement Question (yes, searched) (https://mbworld.org/forums/c32-amg-c55-amg-w203/431148-c55-fuel-filter-replacement-question-yes-searched.html)

xxaarraa 01-16-2012 12:42 PM

C55 Fuel Filter Replacement Question (yes, searched)
 
Folks,

I would like to replace my fuel filter on my 06 C55. I already searched and found this write-up:

https://mbworld.org/forums/c-class-w...placement.html

However, there seems to be some confusion around whether this applies to the C55 or only C32/C230.

Can any C55 owners confirm whether our fuel filters are inside the fuel tank and hence cannot be DIY-ed? Or if they can be changed, can you please share the location and any tips?

Thanks a lot,

lkfoster 01-16-2012 01:58 PM

It's combined with the fuel gauge sensor on the left side within the tank. Price was around $300-400 as I recall for a new unit from a dealer. It looks like you get to remove the fuel pump/level sensor on the right side too to change it.

Don't ask me what the difference is between a fuel gauge sensor and a fuel level sensor, in my world they're the same.:confused:

||C55AMG|| 01-16-2012 05:30 PM

Here is a link to the location:

https://mbworld.org/forums/c32-amg-c...ilter-diy.html

Here is the tool I think we need to remove the fuel sender:

http://www.ebay.com/itm/Mercedes-fue...7#ht_922wt_952

I'm still contemplating doing it myself...

xxaarraa 01-16-2012 05:59 PM


Originally Posted by ||C55AMG|| (Post 5008253)
Here is a link to the location:

https://mbworld.org/forums/c32-amg-c...ilter-diy.html

Here is the tool I think we need to remove the fuel sender:

http://www.ebay.com/itm/Mercedes-fue...7#ht_922wt_952

I'm still contemplating doing it myself...

If the fuel filter is housed within the tank, how do you use this tool? Is it accessible to unscrew from outside the tank somwhere while the tank is still in the car? Or does the tank need to be removed first?

||C55AMG|| 01-16-2012 09:09 PM

The tool is used to remove the fuel sender which has the fuel filter in it. I don't think you have to remove the tank but information is scarce on this topic for the C55. If you find any better information please post. I am also looking to change my fuel filter.

Lenin 01-16-2012 10:02 PM

2 Attachment(s)
Boys, here is some help for you.

||C55AMG|| 01-16-2012 11:34 PM


Originally Posted by Lenin (Post 5008640)
Boys, here is some help for you.

Thanks!

kent426 01-17-2012 01:06 AM

Why do you feel the need to replace the filter? Have you tried cleaning the injectors?

lkfoster 01-17-2012 02:27 AM

Replacing filters are a routine PM function. Up to a point a filter works better as it collects dirt, but as the particulate layer builds up it increases pressure drop. At some point the fuel pump can't provide enough pressure at full load resulting in a lean condition.

xxaarraa 01-17-2012 05:56 AM


Originally Posted by Lenin (Post 5008640)
Boys, here is some help for you.

You are awesome sir! Thank you very much, looks like it's a fairly easy job.

Now, I am on parts.com and looking for the right part to order. Please see the attached parts diagram:

http://www.parts.com/schematics/5/5775510.gif

The description says # 10 is the "Sending unit" and retails for $264. However, it shows the fuel filter as separate - #13 and it retails for only $45. Does that mean that once we get the sending unit off (per the instructions on Lenin's PDF), we can remove the fuel filter and replace that part only? Really hoping this is a $45 job and not $264.

Link to parts.com: http://www.parts.com/parts/2006/MERC...gramCallOut=13

I also cross-checked with mbpartswarehouse and it too lists a "AC Delco Fuel Filter 2005-2006 Mercedes Benz C55 AMG" for $44.
http://www.mbpartswarehouse.com/part...4962951%2B1668

xxaarraa 01-18-2012 05:49 AM

Anyone??

lkfoster 01-18-2012 06:17 AM

The EPC shows that #13 is not valid for my '06.

Quickvr4 05-04-2012 11:28 AM

Any progress on replacing this filter? Based on the schematic it looks like the filter is inline between the pump and pressure regulator.

xxaarraa 05-04-2012 02:37 PM


Originally Posted by Quickvr4 (Post 5179635)
Any progress on replacing this filter? Based on the schematic it looks like the filter is inline between the pump and pressure regulator.

I gave up on this job after the cost associated. Looks like the AMGs need a whole fuel pump assembly which is close to $300 I believe.

loudandheard 05-04-2012 02:45 PM

What mileage are you suppose to do this at? I wonder if a clogged filter is the issue causing the fuel tanks to leak?

Quickvr4 05-04-2012 03:07 PM

I believe every 60k miles. I am unable to find this whole pressure regulator/filter assembly online. Is this a dealer part only?

Quickvr4 05-04-2012 03:11 PM


Originally Posted by xxaarraa (Post 5179942)
I gave up on this job after the cost associated. Looks like the AMGs need a whole fuel pump assembly which is close to $300 I believe.

Were you able to locate #13 in the diagram? It looks like that is the filter that is inline between the pump and regulator. It seems like an easy job once you disconnect the fuel lines and pull the units out.

xxaarraa 05-04-2012 06:26 PM


Originally Posted by Quickvr4 (Post 5179997)
Were you able to locate #13 in the diagram? It looks like that is the filter that is inline between the pump and regulator. It seems like an easy job once you disconnect the fuel lines and pull the units out.

Nope. If you try it, post up the findings.

walee112 07-08-2012 06:23 PM

1 Attachment(s)

Originally Posted by xxaarraa (Post 5008979)
You are awesome sir! Thank you very much, looks like it's a fairly easy job.

Now, I am on parts.com and looking for the right part to order. Please see the attached parts diagram:

http://www.parts.com/schematics/5/5775510.gif

The description says # 10 is the "Sending unit" and retails for $264. However, it shows the fuel filter as separate - #13 and it retails for only $45. Does that mean that once we get the sending unit off (per the instructions on Lenin's PDF), we can remove the fuel filter and replace that part only? Really hoping this is a $45 job and not $264.

Link to parts.com: http://www.parts.com/parts/2006/MERC...gramCallOut=13

I also cross-checked with mbpartswarehouse and it too lists a "AC Delco Fuel Filter 2005-2006 Mercedes Benz C55 AMG" for $44.
http://www.mbpartswarehouse.com/part...4962951%2B1668


Something looks wrong with the diagram on Parts.com that fuel filter looks alot like the one that the C32 uses. Shouldn't the fuel filter look something more like the diagram that "Lenin" posted with his instructions to replace the fuel filter? Anyways, I'm interested cause that is what I bought about a 2 years ago, and am hoping I didn't buy the wrong part! Can anyone confirm this?

Part #2094700494 - Fuel gauge sending unit - $262.00 off Parts.com!!!

JonMBZ 07-08-2012 07:33 PM

The way EPC works is it shows pictures for all W203s then it uses filters/vin codes to filter out parts that do not apply to that specific vehicle. If you removed the filters you would notice it's a regular filter for another car. So the part you are looking for doesn't actually exist from the dealer.

walee112 07-09-2012 07:23 PM


Originally Posted by JonMBZ (Post 5273231)
If you removed the filters you would notice it's a regular filter for another car. So the part you are looking for doesn't actually exist from the dealer.

Huh? Sorry maybe I'm being a little dyslexic, but I'm not sure if I understood you correctly. Could you please clarify :confused: so did i buy the wrong part? :nix:

lkfoster 07-09-2012 08:07 PM


Originally Posted by walee112 (Post 5274732)
Huh? Sorry maybe I'm being a little dyslexic, but I'm not sure if I understood you correctly. Could you please clarify :confused: so did i buy the wrong part? :nix:

For my '06 part number 13 does not apply. If (when) I change my fuel filter I will need part number 9. MB uses generic diagrams and then uses your VIN to filter out parts that do not apply.

walee112 07-09-2012 09:06 PM


Originally Posted by lkfoster (Post 5274799)
For my '06 part number 13 does not apply. If (when) I change my fuel filter I will need part number 9. MB uses generic diagrams and then uses your VIN to filter out parts that do not apply.

gotcha........! :slap:

DG83 C55 07-09-2012 10:19 PM

So is this DIY-able by a decent home mechanic or what?

Damian

JonMBZ 07-09-2012 11:06 PM

Couldn't tell you, but just make sure he changes the seals, they tend to leak.


All times are GMT -4. The time now is 10:58 PM.


© 2024 MH Sub I, LLC dba Internet Brands