DAzzi

Do you guys thing these 20" rims would be too large or would not fit on my
C55?

http://vancouver.en.craigslist.ca/va...082547111.html

Arab_Homie

wont fit. maybe with some modification but def wont be a bolt on fit. I am all for 20's, but u will find alot of members here prefer 19's. Do the 20's, stand out from all the 19's. but seriously, u wont get hardly any support on here for 20's. I'm throwing some 20's on my car. Check out Mandrus they make wheels specifically for our cars. MOZ, Asanti, and some others can do custom makes to fit and get u deep dish/deep lip if you are going for a staggered setup.

Gramma_Benz

if you go for 20's, be prepared for a harsh ride and tons of scraping! It's even pretty unavoidable with 19's.

Check this thread for more info:

https://mbworld.org/forums/c-class-w203/253761-w203-cl203-aftermarket-wheel-thread-all-you-want-know.html

Arab_Homie

Def NOT true. I did plenty of 20's on w203s and no problem if you do the right fitment and roll the fenders. if you buy the cheap 1 piece wheels, then more then likely you will have rubbing. I dont know why people make 20's seem so bad. and ride quality was hardly much of a noticeable difference. However, one thing i will admit is the 20's will rub a bit if you cut a super duper sharp corner or slightly scrape if you have 2 heavy people in the back and are going on a freeway with bumps and dips.

Richardmozis

I see that you are from Vancouver and that you are a new owner. What colour is your car?