P0130
Thread Starter
Junior Member
Joined: May 2008
Posts: 23
Likes: 1
92 300zx, 96 Tacoma, 99 ML320
P0130
ok guys i've been getting p0130 for a little while now, other than running rich its been drivable. anyways i finally replaced my o2 (bank 1, sensor 1). erased the code and after driving 20 miles the code is back. all i'm getting is p0130. now, i changed the passenger side o2 before the cat. this was the correct one right? if so what else could be causing this?
EDIT: just wanted to say i do have an exhaust leak after the manifold where it meets the cat. i see no cracks and the exhaust has been messed with and re tightened.. still leaks. i'm guessing this leak before my o2 is what may be causing the code. now i guess i have to figure out why it leaks as there is no gasket.
EDIT: just wanted to say i do have an exhaust leak after the manifold where it meets the cat. i see no cracks and the exhaust has been messed with and re tightened.. still leaks. i'm guessing this leak before my o2 is what may be causing the code. now i guess i have to figure out why it leaks as there is no gasket.
Last edited by DrewZ926; Oct 19, 2013 at 01:25 AM.
