Quaife issue
01-13-2014, 07:02 PM
#1
Quaife issue
last week my axle slipped out of Quaife LSD diff, anyone else had this issue? Oem c-clips can't be used with this LSD, what are you guys doing to keep axle in place. Appreciate any advice.
Car is 2002 w208 clk55 and using qdf7v quaife LSD, this should be same diff/LSD as c32.
Car is 2002 w208 clk55 and using qdf7v quaife LSD, this should be same diff/LSD as c32.
01-14-2014, 10:07 AM
#2
Member
Join Date: Jan 2012
Location: Carrollton, Tx.
Posts: 192
Likes: 0
Received 4 Likes
on
4 Posts
2003 C32 AMG, 2015 RAM 1500 4x4, 2012 Merc GL450
Axle slip out????
I put a quaife in my C32, I dont see how the axle is able to slip out with the wheel hub bolted in place, the circlips only hold the differential unit in place, the axles are a push in with only the wheel hub to secure them,,,
01-14-2014, 10:58 AM
#3
MBWorld Fanatic!
Join Date: Mar 2004
Location: North NJ
Posts: 2,073
Likes: 0
Received 27 Likes
on
25 Posts
2002 C32 AMG, 2013 GLK 350/4, 2015 E63S AMG Wagon
Check to see if anything is broken. I know that 2002 axles are known for causing leaks. But never heard of it just slip out out.
01-18-2014, 09:39 AM
#5
Super Member
Join Date: Oct 2008
Location: seattle
Posts: 837
Likes: 0
Received 22 Likes
on
20 Posts
1990 300ce supercharged and intercooled
You should have the old two piece axles in your car that used the c clip that had to be pulled with the diff cover off. When you put the lsd in you can not use them. So what you have to do is have the stub shafts turned down a little for the newer one piece style push in axle retainers to fit on. It does not take much and you would want to make sure that it is about the same as a newer axle so get one to compare for the machine shop.
