For those who have dyno'd the c32, baseline stock #'s?
Kevin
https://mbworld.org/forums/showthrea...threadid=39677
For whatever reason my car feels much peppier today. Perhaps my comfort level is rising with familiarity and I'm actually pushing it harder. But man this thing goes like stink. Maybe its all those ounces I saved by going to the flat hood badge. Oh and it got washed today so all of that heavy dust and bug mess weight is off the car.
Kevin
Trending Topics
The Best of Mercedes & AMG
Kevin
Well, I went to dyno and turned off the ESP and for some reason the brakes stayed on during the pulls. The graph looked healthy up until that brakes came on. It was putting down close to 250 RWHP at what looked like midway through the graph. If you followed the arching line it would have been up towards 300 depending on how the graphs look on these C32s. Two error lights came up for 'brake assist not available' and something about esp not available.
Kevin
i had the same 2 errors ..anyhow i think others and i including Evosport which are the pros on modifying the c32 idd dyno pulls in 3rd gear...(need some expert input on this from evo)
Screens in Diagnostic Mode
Insert Key, turn to position 1,
immediately hold Odometer Reset button in for 30 seconds.
small beep:
use the page up/page down buttons on the wheel to get this display
INSTR SW 3701 Ver 7D
INSTR HW 4501
INSTR NO A203 540 98 11
Oil level __ . __ Qts
Eng: ___________________
Turn to position 2, Oil and Engine type is now available.
small beep:
INSTR SW 3701 Ver 7D
INSTR HW 4501
INSTR NO A203 540 98 11
Oil level 7.5 Qts this is rrf standard
Eng: AMG M112 E32ML
ESP Dynometer Test
“ON”
“W. TERM 15 OFF” << Normal Selection
(select what you want with the “+”/”-“ buttons on wheel,
Enter the selection with the “v” key on the wheel)
If Dynometer test is left ON then Fault 3 is displayed upon restart of the motor
In that case: reset to W. TERM 15 OFF << Normal Selection
(as soon as the ESP Dyno Test display comes back on)
Kevin







