///AMGSC C32 build
Thread Starter
Senior Member
Joined: Apr 2014
Posts: 479
Likes: 1
From: North Jersey
2019 GLE63s
@cm60k @FlatlineEF9 @Settthhh Thanks guys, I really appreciate it.
@madspeed here's how it sounds after the headers install
@madspeed here's how it sounds after the headers install
Last edited by ///AMGSC; Dec 9, 2015 at 06:20 PM.
MBWorld Fanatic!
Joined: Feb 2004
Posts: 5,475
Likes: 5
From: City with Tall buildings!
C43/55,2k11 Volvo S60 T6AWD,2k Audi B5 S4,95 Eagle Talon Tsi AWD 500+awhp
Sheez you guys have to hear it in person!!
Its insanely loud hoping Marq will get some mufflers on there soon or when he does the BIG project stay tuned
Its insanely loud hoping Marq will get some mufflers on there soon or when he does the BIG project stay tuned
Thread Starter
Senior Member
Joined: Apr 2014
Posts: 479
Likes: 1
From: North Jersey
2019 GLE63s
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
Senior Member
Joined: Apr 2014
Posts: 479
Likes: 1
From: North Jersey
2019 GLE63s
Thread Starter
Senior Member
Joined: Apr 2014
Posts: 479
Likes: 1
From: North Jersey
2019 GLE63s
Went to Jeff today to get the oil leak checked out. We took the alternator out to see if it was either the timing chain tensioner or a gasket in the valve cover. The tensioner was loose so we immediately knew it was that, tightened it up and now I have all that power back that I lost. Swapped in a used o2 sensor for a c240 to replace the faulty one and man does she fly now lol. Throttle response is amazing!! Can't wait to see what she puts down on a dyno.
Thread Starter
Senior Member
Joined: Apr 2014
Posts: 479
Likes: 1
From: North Jersey
2019 GLE63s
Going to a dealer sometime this week to get all the screws and clips for the fender liner so I can install that along with a clock spring next weekend then finally we can start working on the winter project 
Last edited by ///AMGSC; Dec 19, 2015 at 06:17 PM.
Thread Starter
Senior Member
Joined: Apr 2014
Posts: 479
Likes: 1
From: North Jersey
2019 GLE63s
Thread Starter
Senior Member
Joined: Apr 2014
Posts: 479
Likes: 1
From: North Jersey
2019 GLE63s
Thread Starter
Senior Member
Joined: Apr 2014
Posts: 479
Likes: 1
From: North Jersey
2019 GLE63s
Updated list of things on the To Do list; Had to put the headlights on hold and get these things done before I store the car.
- passenger side fender trim
- passenger side weather strip door seal rail
- driver side fog light and fender trim
- clock spring
- driver + passenger side front door pull handles
- wheel alignment; Feeling some vibration, may be due to different camber degree settings in the rear. During initial install one of the Continental tires wouldn't hold air so I had to run a different tire on the passenger side causing different camber degrees in the rear. After having a bent wheel that shredded the different brand tire I replaced it with a Continental to make the tread pattern the same all around so camber should be equal after this new alignment. Will update with how the ride feels post-alignment this weekend.
- passenger side fender trim
- passenger side weather strip door seal rail
- driver side fog light and fender trim
- clock spring
- driver + passenger side front door pull handles
- wheel alignment; Feeling some vibration, may be due to different camber degree settings in the rear. During initial install one of the Continental tires wouldn't hold air so I had to run a different tire on the passenger side causing different camber degrees in the rear. After having a bent wheel that shredded the different brand tire I replaced it with a Continental to make the tread pattern the same all around so camber should be equal after this new alignment. Will update with how the ride feels post-alignment this weekend.
Super Member
Joined: Aug 2014
Posts: 636
Likes: 19
C32 amg
Updated list of things on the To Do list; Had to put the headlights on hold and get these things done before I store the car.
- passenger side fender trim
- passenger side weather strip door seal rail
- driver side fog light and fender trim
- clock spring
- driver + passenger side front door pull handles
- wheel alignment; Feeling some vibration, may be due to different camber degree settings in the rear. During initial install one of the Continental tires wouldn't hold air so I had to run a different tire on the passenger side causing different camber degrees in the rear. After having a bent wheel that shredded the different brand tire I replaced it with a Continental to make the tread pattern the same all around so camber should be equal after this new alignment. Will update with how the ride feels post-alignment this weekend.
- passenger side fender trim
- passenger side weather strip door seal rail
- driver side fog light and fender trim
- clock spring
- driver + passenger side front door pull handles
- wheel alignment; Feeling some vibration, may be due to different camber degree settings in the rear. During initial install one of the Continental tires wouldn't hold air so I had to run a different tire on the passenger side causing different camber degrees in the rear. After having a bent wheel that shredded the different brand tire I replaced it with a Continental to make the tread pattern the same all around so camber should be equal after this new alignment. Will update with how the ride feels post-alignment this weekend.
Thread Starter
Senior Member
Joined: Apr 2014
Posts: 479
Likes: 1
From: North Jersey
2019 GLE63s
Thread Starter
Senior Member
Joined: Apr 2014
Posts: 479
Likes: 1
From: North Jersey
2019 GLE63s
Sorry, been extremely busy since I received my firefighter written exam results back. Passed with flying colors and it's surreal that I'll be working my dream job in a matter of months. Gonna be training for my physical exam this summer so things were put on hold but whenever I get some free time I'll be working on the car as much as I can.
Did the wheel alignment and man did I need it badly haha. Next thing I have to get is the Supersprint 844247 muffler because I got stopped by the police and they gave me a fix it ticket -_- said I need a muffler or they'll tow my car. Placing the order Thursday and it takes 4 weeks for delivery so I'll give my next update when we do the install...should be a nice exhaust note running 2.75" piping from headers to the muffler.
Did the wheel alignment and man did I need it badly haha. Next thing I have to get is the Supersprint 844247 muffler because I got stopped by the police and they gave me a fix it ticket -_- said I need a muffler or they'll tow my car. Placing the order Thursday and it takes 4 weeks for delivery so I'll give my next update when we do the install...should be a nice exhaust note running 2.75" piping from headers to the muffler.
Thread Starter
Senior Member
Joined: Apr 2014
Posts: 479
Likes: 1
From: North Jersey
2019 GLE63s
Friend took a video when we left this local meet.
https://www.instagram.com/p/BD4g0d3n...n-by=vdubb1999
https://www.instagram.com/p/BD4g0d3n...n-by=vdubb1999
