C32, C55 AMG Picture Thread
#2707
Member
Thanks!
Bilstein B14 coilovers.
Wheels are TSW Mirabeau.
R19 8.5J ET32 (235/35)
R19 9.5J ET40 (265/30) +7mm spacers
Front don't rub, in the rear I had to grind inner tabs to run with 7mm spacers.
Bilstein B14 coilovers.
Wheels are TSW Mirabeau.
R19 8.5J ET32 (235/35)
R19 9.5J ET40 (265/30) +7mm spacers
Front don't rub, in the rear I had to grind inner tabs to run with 7mm spacers.
Last edited by busta55; 06-16-2015 at 07:56 AM.
#2709
Senior Member
Join Date: Nov 2014
Location: Downingtown, PA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
none... for now
Maybe it's because "reserved" is considered luxury to some or maybe I'm just too low-brow for Mercedes, but the darkish red/blue interiors are ok to me, but not great.
Give me a sizeable V8, small body, C55 with the bright red/black interior a few CLK's had!!!
Give me a sizeable V8, small body, C55 with the bright red/black interior a few CLK's had!!!
#2710
Super Member
Still ain´t rubbin´
285´s in rear.
Bilstein b8s and custom lesjöfors springs are on(at rear)
Waiting for customsprings for front, then b8´s are going on at front also.
-1.4 camber at rear
-0.3 toe
Last edited by swedepat; 06-21-2015 at 05:00 AM.
#2711
Member
Two C55's and a CLK55 converge in downtown Boise, Idaho for a little photo shoot. Check 'em out!!
https://mbworld.org/g/album/3705380
Naugamanator
https://mbworld.org/g/album/3705380
Naugamanator
#2715
MBWorld Fanatic!
but I did think they'd be a bit more concave being 19x10.
#2716
Senior Member
Yeah I know smh most of the 19x10s I found have +32 offsets...I just recently changed my 3 pieces from 19x8.5 +32 to 19x9.5 with 4" lips so hopefully that offset drops to around +19
#2717
Member
9,5J with ET19 will rub as hell.. or I don't know what you are doing to your arches or your roads are silky smooth..
I still have rubbing issue with ET33 R19 9.5J, inner tabs fully cutted. Rubs only on heavy dips.
I still have rubbing issue with ET33 R19 9.5J, inner tabs fully cutted. Rubs only on heavy dips.
#2719
Senior Member
My old wheels (Mandrus Millenniums) were 18x9.5 +35 and barely rubbed with 15mm spacers after I got the fenders rolled and cambered a bit...Originally wanted to make my 3 pieces 19x10 but the offset would've been way too aggressive and I dont want that tilted camber look
Last edited by ///AMGSC; 06-25-2015 at 03:38 PM.