When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I managed to break off one of the e-torx screws of the Rear Driver side Brake dust shield and the sheered screw body is resting comfortably in the rear knuckle. A moment of stupidity.
I'd like to get the exact screw and install it, once I remove the broken screw.
I looked in the WIS (don't have xentry) and couldn't find a part # for the screw: Diameter, thread pitch, length. Please refer to the picture attached (find # 42203 blue box)
Does anyone here know of the size and part #? Suggest an alternate part if relevant
Please and thx!
Last edited by chimera_1; Oct 16, 2025 at 12:26 AM.
Reason: Spelling
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
C32 AMG 2003 Rear Brake Dust Shields (L+R)
