Well, prior to locating the thread about the Y piece in the back of the seat, I decided to try and take the orthopedic seat controller on the driver side apart to figure out why the lumbar support wasn't working. Well, I got the front part of it to unhook and now I can't get it to go back together. With it unhooked, there is no air control and the compressor in the trunk runs continuously, which I would imagine it is not designed to do. I don't want to drive around with the compressor running, so I'd like to be able to figure this out soon. Has anyone else had this piece apart and know how to either take it completely apart or get it to go back together?

Well, just in case anyone else runs into this issue. I took the seat out by undoing the four bolts that hold the seat in. They use a reverse torx sort of bolt. Then I undid the wiring connections and air connection at the front of the seat. Then you basically have to use a small screw driver to line the nipples up with the holes in the controller and snap it back down. A pain in the *** to do with the seat still in but not bad once you get it out.