C36 AMG Rear anti roll bar mod
Thread Starter
Senior Member
Joined: Dec 2005
Posts: 370
Likes: 0
From: Lebanon
1995 C 36 AMG; 1992 W124 300E (M103 Ex Mosselman TT KIT) was 320hp @10psi now stock :(
C36 AMG Rear anti roll bar mod
i have not been able to find a thicker rear roll bar for my 202 36AMG. I have found the front bar off a w208 55 and it has done wonders to the car, so here goes what i have done.
I know it looks ugly but so far it is working gr8 and the rear now tracks beautifully on braking. the car is more responsive.
I will try and redo it making it more reliable and better looking.
What i have done is shorten the leaver pivot point which works like increasing thickness.
my next step is to push it further in, ill look into it on Monday.
I know it looks ugly but so far it is working gr8 and the rear now tracks beautifully on braking. the car is more responsive.
I will try and redo it making it more reliable and better looking.
What i have done is shorten the leaver pivot point which works like increasing thickness.
my next step is to push it further in, ill look into it on Monday.
MBWorld Fanatic!
Joined: Aug 2006
Posts: 7,053
Likes: 398
From: A.D., U.A.E
2000 (W202 C200) & 2000 (W202 C55)
Good idea,, also can put alloy version # "124 320 04 89", instead of the our plastic # "124 320 02 89",,
as i remember; it needs a little cut from the bottom rubber bushings, i put them in my previous 500E........
ZAYED,,
as i remember; it needs a little cut from the bottom rubber bushings, i put them in my previous 500E........
ZAYED,,
Last edited by cm60k; Apr 8, 2012 at 07:36 AM.
