best drop for stock 17 inch wheels?
Thread Starter
Member
Joined: Apr 2013
Posts: 106
Likes: 0
From: louisville,ky
1999 c43 amg
i went with 15mm because anything smaller wasnt hubcentric..on the c280 did u go through with the rolling or just decide to keep it simple and go without? any help would be appreciated
Last edited by mrhassouneh; Jul 24, 2013 at 02:35 PM.
Senior Member
Joined: Mar 2004
Posts: 316
Likes: 0
From: San Francisco, CA
1996 C36
I had to file the back of the molding and bend back or "roll" the body edge. Now that i have my car back from the shop ill take a picture of the area in the morning.
Last edited by mbsickness; Jul 26, 2013 at 11:56 PM.
Senior Member
Joined: Mar 2004
Posts: 316
Likes: 0
From: San Francisco, CA
1996 C36
Sorry for the delay.
To accomodate this...
I had to file the back of the molding as it wraps around the body edge and roll or bend the body lip below the molding for the tire not to rub on bumps.
To accomodate this...
I had to file the back of the molding as it wraps around the body edge and roll or bend the body lip below the molding for the tire not to rub on bumps.
