Lowering a C43
Thread Starter
Newbie
Joined: Mar 2004
Posts: 1
Likes: 0
Lowering a C43
Hi there
Just got myself a C43 and was wondering if you guys could help me out. I want to lower the car on Eibach/H&R springs but ahve been told that there is no specific kit for the C43. Looking through the forum I have noticed people mentioing pads of different numbers which are used along with the springs. Can anyone shed some light on the issue (part numbers etc) as I am clueless at the moment
Just got myself a C43 and was wondering if you guys could help me out. I want to lower the car on Eibach/H&R springs but ahve been told that there is no specific kit for the C43. Looking through the forum I have noticed people mentioing pads of different numbers which are used along with the springs. Can anyone shed some light on the issue (part numbers etc) as I am clueless at the moment
MBWorld Fanatic!
Joined: Jan 2002
Posts: 1,597
Likes: 0
From: San Francisco, CA
1996 C36 AMG, 1995 Volvo 850 Turbowagon
here's the thread
the higher the pad number, the thicker
i probably have the thickest pad on the car right now...it sits taller than a regular c280....and the wheel gap is suv canyon-sized....
the higher the pad number, the thicker
i probably have the thickest pad on the car right now...it sits taller than a regular c280....and the wheel gap is suv canyon-sized....
