When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I think mine had a a manufacturing defect. The wiring harness has a clip that looks like it is supposed to snap into the body of the tuner. My harness has a metal band that rides too close to the teeth of the clip and prevents them from engaging. I believe the only thing that was holding it in place was the adhesive and pressure from the rubber boot on the harness.
Pics forthcoming...
I think this is just an early production QC miss. These happen. The real test will be in how well Dinan responds. I'm not worried about Golan and Autotalent, he's been solid from the get go. I expect Dinan will be too.
Zipped to the left air intake pipe. I don't think the mount location had anything to do with the failure though. It looks like a manufacturing defect to me.
I hope my AMR tune doesn't fall apart like that! I hope my AMR tune is almost as strong too
The AMR tune isn't a piggyback, therefore it cannot "fall apart" lmao the dinan unit is a piggyback device that plugs in. Clearly it is low quality if it is falling apart lol. This is why the piggyback route is a waste of money in my opinion.
The AMR tune isn't a piggyback, therefore it cannot "fall apart" lmao the dinan unit is a piggyback device that plugs in. Clearly it is low quality if it is falling apart lol. This is why the piggyback route is a waste of money in my opinion.
I'm no materials engineer, but mine appears to be of industry standard or higher quality.
I asked the location suspecting heat separation of the adhesive.
I'm no materials engineer, but mine appears to be of industry standard or higher quality.
I asked the location suspecting heat separation of the adhesive.
I have to agree, it looks like the casing/wrap/adhesive melted for some odd reason which probably allowed for the clip separation.
I will take a look at mine this evening to inspect for any abnormal wear. If Dinan provides a new unit at no costs, that would be super awesome. I like my unit, and I am just waiting for a little more miles before I go full ECU tune and down-pipes. As of right now the bang for buck on this Dinan unit is good.
Does this piggy back really turn the car into a polar bear strong machine!!?? I can't wait to install it on top of my AMR tune to see if it's like two polar bears on top of each other's!! I love polar bears piggy backing each other!!
I have to agree, it looks like the casing/wrap/adhesive melted for some odd reason which probably allowed for the clip separation.
I will take a look at mine this evening to inspect for any abnormal wear. If Dinan provides a new unit at no costs, that would be super awesome. I like my unit, and I am just waiting for a little more miles before I go full ECU tune and down-pipes. As of right now the bang for buck on this Dinan unit is good.
It may not be clear from the pic.
The black material around the terminus of the white clip is metal. The edge of the metal is irregular and is causing interference with the clip and the body of the tuner box.
There is no evidence of heat damage of any sort. This appears to be a fitment issue with the metal shroud. I'm assuming the metal shroud is there to protect the wiring harness from being kinked.
agreed. no need to hijack a thread and promote a shameless plug for yourself.
I am still waiting for the Elite/Performance tune from them. Somebody has got to be able to send them a c450/c43/GLC43 sheesh.
I wish there were more tuners like Burger MotorSports on the BMW side. They would actually buy/lease a stripper car and tune it. Then re-sell or keep it depending on if the platform is useful or not.
I have the Sport so I believe the Elite will be worth the wait.
Not sure the point of your post. I also have the sport tune on my GLC43. I was just hoping they would have a car by now to work on the elite/performance piggyback like what they have for BMW.
So far I haven't seen anything worth-while from the other piggybacks on the market. I like Dinan so I am hoping they come out with a good plug-and-play product so I would not have to go with another tuner having to ship off my ecu. I like being able to connect and disconnect my current sportronic device 😎
i just received and installed mine today. Am I right in saying that there shouldn't be any "learning" process for this piggyback tune as it is simply tricking the car into thinking it needs more boost?
The reason I ask is because I haven't driven too much at all since installing it, but I don't feel like I'm noticing much difference.
Also, should the boost meter in the AMG screen be acting differently at all as a result of installing the tune?
07-11-2017, 02:02 AM
The AMR tune isn't a piggyback, therefore it cannot "fall apart" lmao the dinan unit is a piggyback device that plugs in. Clearly it is low quality if it is falling apart lol. This is why the piggyback route is a waste of money in my opinion.
