To plasti-dip or not....
#26
Junior Member
#29
#31
Awesome, gotta do this on my car ASAP. the silver diffuser looks so strange on a black car.
Can I ask what front license plate mount you're using? I need to get one of these, a cop just gave me a ticket last week for not displaying a front plate
Can I ask what front license plate mount you're using? I need to get one of these, a cop just gave me a ticket last week for not displaying a front plate
#32
Senior Member
Join Date: May 2013
Location: Winnipeg, Manitoba, Canada
Posts: 320
Received 34 Likes
on
27 Posts
2020 MB-AMG GLC43
That took some creativity. I ordered a bracket from eBay and then I actually used Zip ties to hold it on the centre grill. Not perfect - but I hate drilling into the paint.
#33
#34
Former Vendor of MBWorld
Personally, I think if it can be wrapped in vinyl, then I would go with vinyl over plastidip. However, for areas where it's not as practical to do in vinyl, then plasti dip is a good option.
#36
Junior Member
Join Date: Jun 2017
Location: CO
Posts: 33
Likes: 0
Received 1 Like
on
1 Post
'17 C43 Sedan (gone), '08 Evo X MR, '20 C43 Sedan
Holy crap. What a "small" world. I contacted you almost 8 years ago about vinyl wrap for my Evo X. Good to see you're still around, as I think I just was given your email address on the Evo forums and around then I thought someone mentioned they weren't sure if you were still selling vinyl
#37
Former Vendor of MBWorld
(Off-topic)
Holy crap. What a "small" world. I contacted you almost 8 years ago about vinyl wrap for my Evo X. Good to see you're still around, as I think I just was given your email address on the Evo forums and around then I thought someone mentioned they weren't sure if you were still selling vinyl
Holy crap. What a "small" world. I contacted you almost 8 years ago about vinyl wrap for my Evo X. Good to see you're still around, as I think I just was given your email address on the Evo forums and around then I thought someone mentioned they weren't sure if you were still selling vinyl
#38
Member
Join Date: Nov 2010
Location: Lake Tahoe
Posts: 214
Likes: 0
Received 8 Likes
on
8 Posts
2017 C43 AMG
How much did they charge to wrap the skirts?
If you did it yourself was it difficult
If you did it yourself was it difficult
I plasti dipped my rear diffuser front lip and had the bottom side skirts wrapped in vinyl and I'm pleased with the outcome. Just recently painted the calipers as well. I went with a gloss finish to match the midnight package but in retrospect would have likely done it in matte
#40
Junior Member
The 2018 c43 coupe has paint color matched diffuser now. Just built one for ****s n giggles. Actually quite pissed I have a 2017 (I want the AMG Performance Studio Package now too)
#41
Member
Join Date: Nov 2010
Location: Lake Tahoe
Posts: 214
Likes: 0
Received 8 Likes
on
8 Posts
2017 C43 AMG
side skirts
$60???
seems like they charged for vinyl and 5 minutes of labor.
Thats a good price.
Can anyone give me any tips on doing this wrap myself?
I am pretty good with vinyl but the side skirt piece that everyone tries to get black doesn't have an edge.
It has an awkward rounded place where the extension piece goes into the regular side skirt.
Does anyone know what I'm talking about?
Its like theres no seam the make a straight cut in.
Thanks in advance, i think my local place would like to charge me $200, but the vinyl would only cost me about $25
Thanks in advance!
seems like they charged for vinyl and 5 minutes of labor.
Thats a good price.
Can anyone give me any tips on doing this wrap myself?
I am pretty good with vinyl but the side skirt piece that everyone tries to get black doesn't have an edge.
It has an awkward rounded place where the extension piece goes into the regular side skirt.
Does anyone know what I'm talking about?
Its like theres no seam the make a straight cut in.
Thanks in advance, i think my local place would like to charge me $200, but the vinyl would only cost me about $25
Thanks in advance!
#42
MBWorld Fanatic!
iTrader: (1)
$60???
seems like they charged for vinyl and 5 minutes of labor.
Thats a good price.
Can anyone give me any tips on doing this wrap myself?
I am pretty good with vinyl but the side skirt piece that everyone tries to get black doesn't have an edge.
It has an awkward rounded place where the extension piece goes into the regular side skirt.
Does anyone know what I'm talking about?
Its like theres no seam the make a straight cut in.
Thanks in advance, i think my local place would like to charge me $200, but the vinyl would only cost me about $25
Thanks in advance!
seems like they charged for vinyl and 5 minutes of labor.
Thats a good price.
Can anyone give me any tips on doing this wrap myself?
I am pretty good with vinyl but the side skirt piece that everyone tries to get black doesn't have an edge.
It has an awkward rounded place where the extension piece goes into the regular side skirt.
Does anyone know what I'm talking about?
Its like theres no seam the make a straight cut in.
Thanks in advance, i think my local place would like to charge me $200, but the vinyl would only cost me about $25
Thanks in advance!
So you would lay the tap down at the edge you want to cut, lay the vinyl over it. Then pull the wire out of the tape for a perfect edge.
something like this:
https://glutco.com/products/wrapcut-...CABEgK6BfD_BwE
The following users liked this post:
AMG C43 3LV6 (10-29-2020)
#48
Member
Join Date: Nov 2010
Location: Lake Tahoe
Posts: 214
Likes: 0
Received 8 Likes
on
8 Posts
2017 C43 AMG
LaminX
Has anyone attempted the laminX for the tails?
i just worked on it for an hour with no great results.
Anyone go a different route?
they looked great! But the inevitable bubbles really killed me so I peeled it off.
Anyone have success with something else?
The picture above is not my car but ideally this is the look I am going for.
Thanks in advance.
#49
Junior Member
Thread Starter
Just got around to dippin' the badges, splitter, and diffuser. Messed up on the star and ran out of the dip so gonna have to re-do that. Used 3M blue painter's tape, scissors, newspaper, and a plastic card. Next time, I would definitely do it indoors, and I would wait longer before removing the tape. Gonna do touch ups and the emblem during the week.
Last edited by b3nzo; 08-13-2017 at 07:54 PM.