Horsepower Guesses?
The following users liked this post:
MaverickC43 (03-10-2024)
#27
Super Member
If anyone wants more accuracy, this website has a list of different calculators that can give you much more accurate results for anything from ETs, trap speeds, HP, 1/8 mi, 60 feet, gear ratios, and more: http://www.wallaceracing.com/Calculators.htm
The following users liked this post:
jhcole100 (03-11-2024)
#28
Super Member
the main thing is no one on this site has done the turbos so i’m hoping with my setup at full i can start hitting mid 10s i saw this guy on tiktok he has fuel pumps and some other stuff and he was hitting like 10.8 constantly so with the added turbos with e85 i can get in the mid 10 range
Work with your tuner to show you the graphs, any tuner worth their grain of salt is doing a custom tune for these kinds of numbers you are hoping for -- especially with an extensive list of mods.
#29
Junior Member
Thread Starter
Pretty sure mid 10s is the current record, i would assume they already have turbos? Anyway, I am positive others have the exact same Weistec turbos in their setup, maybe not documented well though as it is pretty uncommon.
Work with your tuner to show you the graphs, any tuner worth their grain of salt is doing a custom tune for these kinds of numbers you are hoping for -- especially with an extensive list of mods.
Work with your tuner to show you the graphs, any tuner worth their grain of salt is doing a custom tune for these kinds of numbers you are hoping for -- especially with an extensive list of mods.
#31
Senior Member
Join Date: Mar 2022
Posts: 274
Received 89 Likes
on
70 Posts
2015 C400 4MATIC Palladium Silver Metallic
I haven’t been able to take my car to a drag or test it anywhere cali is really strict when it comes to cars like mine catless downpipes, weistec turbos ecu stage 3 and cpc with cold air intakes what would be the whp of my car like best guess?
also any recommendations on HPFP and LPFP on the cheaper end cause spool is asking for a lot.
after this i’m getting my car retuned by AMR for e30 and wmi from weistec
also any recommendations on HPFP and LPFP on the cheaper end cause spool is asking for a lot.
after this i’m getting my car retuned by AMR for e30 and wmi from weistec
But my C400 hit fuel cutoff (maxed fuel system) trying to beat my best 1/4 mile time of 11.91. That was with e30 (only tuned for 93 octane).
That puts me at probably around ~400whp.
My only mods are Eurocharged tune, Modalworks intake, and JB4 added boost through BCM.
#32
#33
Anything over 600whp will be a great achievement in this platform. You will need rods piston LPFP &HPFP please use spool performance and also there intercooler. You don’t need meth. ECU tune along with TCU tune blend around e50 will be fine im pushing And you better have a tuner that knows what they are doing in writing you a file. And having a dyno as well.
Last edited by jimmykoutoulas; 07-29-2024 at 08:20 PM.
The following users liked this post:
Lou275 (07-30-2024)