Article about new G-Power M3 with 550 HP M5 V-10
#1
Super Member
Thread Starter
Join Date: Mar 2004
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
'05 SL 55 Black/Black w/mods from Eurocharged/Kleemann/BuckheadImports
![Post](https://mbworld.org/forums/images/icons/icon1.gif)
This article says that G-Power has a package now to swap and put in the new V-10 from the M5/M6 in an M3, but tuned for 550 Horsepower, and that they are working on a bi-compressor kit that will be offered in two stages for the V-10 (which is assumed to be available for any M5/M6 also), Stage 1 will be 640 Horsepower and Stage 2 will be 750 horsepower. If they put this in the upcoming all-new M3 CSL, which will most likely come out a year after the all-new M3, that would be some serious power in such a car no doubt.
http://www.egmcartech.com/2007/08/30...sl-gets-550hp/
That would be a cool test with a 750 horsepower M3 against a 750 horsepower seriously modded Kleemann supercharged C63 or supercharged CLK 63 Black Series or supercharged SLK 63 Black series.
http://www.egmcartech.com/2007/08/30...sl-gets-550hp/
That would be a cool test with a 750 horsepower M3 against a 750 horsepower seriously modded Kleemann supercharged C63 or supercharged CLK 63 Black Series or supercharged SLK 63 Black series.
#5
MBWorld Fanatic!
![word](https://mbworld.org/forums/images/smilies/werd.gif)
Although I am a power-junkie, I'd say if you are that obsessed with hp #'s you are better off with an American car or a bi-turbo V12 benzo.
It is going to be wayyyyy too much money to run a setup like that on the Bimmer. I doubt anyone on these forums will dream of doing such a conversion (blown M5 motor in M3 CSL).