MHP v2 Track Results!
Andy, will your V2 tune works fine with your future headers and exhaust? Are you planning on doing a V3 for optimal power gains with Headers-exhaust?
Thanks. Lou
). v2 tuning will work with and without headers/exhaust/CAIs. Obviously we'll make the necessary changes to the tune to accomodate those mods (A/F changes mostly) but the nomenclature will still technically be v2 even though every tune that we cut is 100% custom calibrated to the exact vehicle and modifications in question.
v3 will debut on my car at MIR and will feature 10/10 shift firmness (v1 had 6/10, v2 has 8/10) and 7400rpm shift points in sport mode as well as manual. v2 has 7400rpm shift points in manual only whereas sport/comfort still retain the stock limit.
v3 pricing will be slightly higher than v2 due to the increased amount of time/labor it takes to complete said changes. Again though we expect most customers to choose v2 as it's a great overall package.
I need more seat time, unfortunately the tracks are hella crowded this time of year.
Last edited by MHP; Oct 12, 2008 at 02:56 PM.
how can you completely customize the map when we just ship you an ECU?
do we tell you what mods we have and then you can figure it out that way?
when you say 8/10 firmness what is stock?
is either TCU / ECU detecatable from MB ?
I assume no CEL light is included in the package?
is there anyway to have a limp mode added? I read this in the w204 somewhere and someone brought up a good idea for valeting, or when friends need to move my car etc
Is there anyway for MB to tell if an ECU has been removed (a seal sticker or something?) - (I havent looked for my ECU yet. )
side note - if something did happen (engine / tranny etc problems), and we flash the ecu back to stock would MB be able to figure it out?
okay, a couple more than a couple questions

If you have any other questions fire away.
Thanks
Andy
Troy,
My cost is $1250, list is over $1550. They went up since the last time I bought one (just snagged another for a customer last week) which was a few weeks ago.
Thanks
Andy
The Best of Mercedes & AMG
The removal process literally takes less than 2 minutes.
Thanks
Andy
Yes, any kind of sluggishness or TM coming into play at/near redline, or during a shift is TCM related and cannot be solved with a ECU only tune.
Thanks
Andy
The first five customers to purchase v2 tuning for their C63 receive a $500 discount, making for a total of $3500 for complete driveline tuning. Add $250 for thermalnators/filters.

Anyway, I'll honor the price for you Barry, and for anyone in Canada that has inquired since I posted it.


From now on when using foreign currency it will have to be at an equivalent exchange rate.

Anyway, I'll honor the price for you Barry, and for anyone in Canada that has inquired since I posted it.


From now on when using foreign currency it will have to be at an equivalent exchange rate.

v2 Dyno results. Unfortunately the guy that works the computers at the DJ I use wasn't in today so I had them scan the graph in until they email me the winpep file tomorrow (at which time I can post vs. stock and vs. v1 tuning on the same graph). 5th gear (1:1) SAE correction, smoothing set at 5 to eliminate artificial spikes:


