Dyno results
#26
Super Member
Join Date: Oct 2008
Location: Pittsburgh, PA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
2009 C63 AMG
1) I'm taking my car to the dyno today and will post results soon. I've been searching the forums for how to put the car in dyno mode, but too many results and I've not stumbled upon which posts tells how. Will someone please indulge me with how?
2) The animated gif from jturkel (post #24) make me spit out my coffee this morning. I found it absolutely hilarious.
#28
MBWorld Fanatic!
Join Date: Mar 2007
Location: Charlotte, NC
Posts: 1,063
Likes: 0
Received 2 Likes
on
2 Posts
2002 S430, 2004 Cobra, 2004 Tahoe
2 things here:
1) I'm taking my car to the dyno today and will post results soon. I've been searching the forums for how to put the car in dyno mode, but too many results and I've not stumbled upon which posts tells how. Will someone please indulge me with how?
2) The animated gif from jturkel (post #24) make me spit out my coffee this morning. I found it absolutely hilarious.
1) I'm taking my car to the dyno today and will post results soon. I've been searching the forums for how to put the car in dyno mode, but too many results and I've not stumbled upon which posts tells how. Will someone please indulge me with how?
2) The animated gif from jturkel (post #24) make me spit out my coffee this morning. I found it absolutely hilarious.
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
#29
MBWorld Fanatic!
Key in position 1 or 2, I don't think it matters.
Hold down the Send Phone Call button on the steering wheel for about 1 secs. Then hold down the OK button on steering wheel together with the phone call button for another 3 seconds or so.
This will bring up a screen with Dynameter Mode and 2 other things, scroll down and click Dynameter (OK), then it'll tell you to click OK to turn Dynameter mode on, which will turn off ABS/ESP/etc.
Hold down the Send Phone Call button on the steering wheel for about 1 secs. Then hold down the OK button on steering wheel together with the phone call button for another 3 seconds or so.
This will bring up a screen with Dynameter Mode and 2 other things, scroll down and click Dynameter (OK), then it'll tell you to click OK to turn Dynameter mode on, which will turn off ABS/ESP/etc.
Last edited by BerBer63; 03-19-2009 at 07:27 PM.
#30
#31
MBWorld Fanatic!
Key in position 1 or 2, I don't think it matters.
Hold down the End Phone call or Send Phone Call button on the steering wheel (I can never remember which one) for about 2 secs. Then hold down the OK button on steering wheel together with the phone call button for another 3 seconds or so.
This will bring up a screen with Dynameter Mode and 2 other things, scroll down and click Dynameter (OK), then it'll tell you to click OK to turn Dynameter mode on, which will turn off ABS/ESP/etc.
Hold down the End Phone call or Send Phone Call button on the steering wheel (I can never remember which one) for about 2 secs. Then hold down the OK button on steering wheel together with the phone call button for another 3 seconds or so.
This will bring up a screen with Dynameter Mode and 2 other things, scroll down and click Dynameter (OK), then it'll tell you to click OK to turn Dynameter mode on, which will turn off ABS/ESP/etc.
1. Put Key in Position 2 (1st click to the right, just before ignition)
2. Hold Send Phone call button on steering wheel
3. Now with SEND Phone held, Hold OK button on steering wheel
4. Screen should pop up in dash - click Arrow DOWN to Dynameter press OK
5. Press OK to Enable Dyno Mode
6. Turn ignition on
#32
MBWorld Fanatic!
Join Date: Oct 2008
Location: Central Florida
Posts: 1,521
Likes: 0
Received 3 Likes
on
3 Posts
2013 Chevy 427 Torch Red
Just relearned it:
1. Put Key in Position 2 (1st click to the right, just before ignition)
2. Hold Send Phone call button on steering wheel
3. Now with SEND Phone held, Hold OK button on steering wheel
4. Screen should pop up in dash - click Arrow DOWN to Dynameter press OK
5. Press OK to Enable Dyno Mode
6. Turn ignition on
1. Put Key in Position 2 (1st click to the right, just before ignition)
2. Hold Send Phone call button on steering wheel
3. Now with SEND Phone held, Hold OK button on steering wheel
4. Screen should pop up in dash - click Arrow DOWN to Dynameter press OK
5. Press OK to Enable Dyno Mode
6. Turn ignition on
#33
MBWorld Fanatic!
I just tried to see how the Trip Odometer would come up....
Once you press SEND CALL, then hit OK.
If you press SEND and wait for like 3 or more seconds, then hit OK it goes to reset trip odometer.
So, its like a second or less on SEND, then press OK together. All of this while on the TRIP screen.
I forgot I could just post some videos I found on youtube....here is part 1. Part 2 is on the sidebar.
http://www.youtube.com/watch?v=3tLtaMPS46o
Once you press SEND CALL, then hit OK.
If you press SEND and wait for like 3 or more seconds, then hit OK it goes to reset trip odometer.
So, its like a second or less on SEND, then press OK together. All of this while on the TRIP screen.
I forgot I could just post some videos I found on youtube....here is part 1. Part 2 is on the sidebar.
http://www.youtube.com/watch?v=3tLtaMPS46o
Last edited by BerBer63; 03-19-2009 at 07:24 PM.