multifunction display
Thread Starter
Junior Member
Joined: Aug 2009
Posts: 73
Likes: 0
From: Long Island
2010 C350 Arctic White/Black
multifunction display
i would like to have my instrument cluster multifunction display either stay in the amg mode or audio mode. i have read the manual and tried everything possible to do this but each time i restart the car it defaults to the mileage/odometer mode.
am i missing something elementary or is it impossible to do this?
am i missing something elementary or is it impossible to do this?
MBWorld Fanatic!
Joined: Nov 2008
Posts: 3,082
Likes: 0
From: Vancouver, Canada
R8
i would like to have my instrument cluster multifunction display either stay in the amg mode or audio mode. i have read the manual and tried everything possible to do this but each time i restart the car it defaults to the mileage/odometer mode.
am i missing something elementary or is it impossible to do this?
am i missing something elementary or is it impossible to do this?
Junior Member
Joined: Sep 2008
Posts: 66
Likes: 0
From: PA
2010 C63 / 2009 GL450
My display stays where I left it. When I start the car, I have AMG screen with oil and coolant temp display as before. Unfortunately, I can't tell you how it was set up since car was given to me this way. It may be a new function related to 2010 as I have noticed similar problem as yours with 2009 GLK which I had for a month as a loaner. The GLK always reverted back to mile/odo display when I started the car regardless of screen where I left it.
I suspect that there was a change for 2010 since my tire pressure monitor also reads out actual pressure rather than low pressure warning.
I suspect that there was a change for 2010 since my tire pressure monitor also reads out actual pressure rather than low pressure warning.
