HELP: My led sockets are burnt
02-11-2010, 10:09 PM
#1
HELP: My led sockets are burnt
https://mbworld.org/forums/c-class-w...-thread-9.html
So there was a group buy from a user on this board who sold LEDs to a bunch of people. These looked great in the beginning but then I started to get this error message on my dash. I was lazy and didn't check and now few months later all four led sockets in my headlights are burnt. I switched out the outer two and put stock LEDs back in, but the inner two are burnt so bad that I can't even pull the bulb out. I even pulled the wires off the socket on the drivers side. I'm considering doing the same to the passenger side because I'm afraid it'll do more damage to teh headlight assembly.
Is there a chance I might have to change the whole head light assembly because of this?
How hard is it to take the headlight assembly out?
What options do I have to fix the socket, wire that were damaged?
So there was a group buy from a user on this board who sold LEDs to a bunch of people. These looked great in the beginning but then I started to get this error message on my dash. I was lazy and didn't check and now few months later all four led sockets in my headlights are burnt. I switched out the outer two and put stock LEDs back in, but the inner two are burnt so bad that I can't even pull the bulb out. I even pulled the wires off the socket on the drivers side. I'm considering doing the same to the passenger side because I'm afraid it'll do more damage to teh headlight assembly.
Is there a chance I might have to change the whole head light assembly because of this?
How hard is it to take the headlight assembly out?
What options do I have to fix the socket, wire that were damaged?
