Don Nguyen

This is a gray E46 M3 that I vinyl wrapped the roof in my gloss black material. Went with the gloss black to give it that more factory look, to simulate somewhat of a CSL look, even though the CSL had a real CF roof. The owner of this car was also in Orange County as well.

Before:





After:

















-Don

donathon@gmail.com

Don Nguyen

Haven't had much of a chance to post pictures in a while, but finally getting some time to do so again.

Here's a black Mercedes Benz C300 that came out to me in Anaheim Hills/Orange county to have his window trim vinyl wrapped in matte black. We blacked out the chrome on his car. Unlike BMWs, the Mercedes does not have the shadowline/black trim option.





















-Don

donathon@gmail.com

Don Nguyen

I don't normally post pictures of kind of off/side projects that aren't from the normal roof, window trim, etc. However, I figure I'll start posting them more since I've had quite a few requests or people ask me about this.

Here's a SC400 that I vinyl wrapped the lower lip on the bumper in the 3M 1080 glossy carbon fiber vinyl material. The lip was fairly damaged, hence the crack which you can clearly see through the material and some other small chips along the bottom edge of the lip. I do not usually wrap lips, since they require a seam line in the middle, due to the lengths that lips usually are (~7'-8'). In the picture taken front on, you can see the small seam line a couple of inches to the left of the crack. To some that may be acceptable, while to others it may be something they'll always see/notice. Hopefully this will give you guys somewhat of a better idea of how it'll work/look.









-Don

donathon@gmail.com

Ex_Red

Are you going to be up in NorCal again sometime? I'd like to get the shadowline treatment for the chrome around my windows and gloss black for the chrome on the trunk lid.

Don Nguyen

I am possibly going to be up in San Jose around January. I will confirm and make a thread for it once I do find out.

-Don

Don Nguyen

It's not often I get bigger bodied cars like this E65 745il come by to have vinyl work done on their cars. However, the owner of this car contacted me to see if I could black out the chrome on his window trim, to give it the shadowline look. We ended up going with the matte black finish over the gloss black finish so that it'd match the rubber around the windows and the already matte door pillar pieces. The owner of this car was from Los Angeles area and drove out to me in Orange County to have the vinyl work done.















-Don

donathon@gmail.com

Don Nguyen

Here is a black Mercedes Benz CLS63 AMG that came by to have me vinyl wrap his chrome window trim in my matte black vinyl material to black it out. The owner of this car was also from Irvine/South Orange County and came out to me in Anaheim Hills to have the vinyl work done. I think the matte black still goes fairly well on the black car, since the trim does not just blend in with the rest of the car, but still accents the trim pieces nicely.







After:














-Don

donathon@gmail.com

Ex_Red

Looks really good!

Thanks for posting those pics.

On my C63, I'd properly still want the gloss black on the trunklid...sort of a nod/homage to my E46s which had the equivalent trim piece painted in body color.

Don Nguyen

Sounds good. I do a lot of work on C63s actually, so I am fairly familiar with them.

Let me know whenever you're ready to get it done.

-Don

Don Nguyen

This is something different than what you guys are used to seeing me post. I vinyl wrapped the center/raised portion of the hood on this white BMW E92 M3 with my matte black vinyl material. Of course, the roof on this car was already carbon fiber, so I did not have to do anything with that. However, the owner of this car wanted to give it a more aggressive look without it being permanent and no other vinyl shops were willing to do this on his car. Luckily he found me, and I've done this for several cars in the past before, so it wasn't a problem. Owner of this car was from around south Orange County and came over to me in Anaheim Hills.

















-Don

donathon@gmail.com

Ex_Red

I'd like to see more of the E24 with the M-Parallels.

Don Nguyen

You mean AC Schnitzers

Ex_Red

D'oh!

Don Nguyen

The owner of this car came out to me in Orange County from around Los Angeles somewhere to get the roof of his silver 350z wrapped in my gloss black vinyl material.

Before:




After:











-Don

donathon@gmail.com

Don Nguyen

Usually when I black out window trim it is because they are chrome/brushed aluminum, but in this case, the originally black window trim on this car had just faded to a copperish metal hue. So what I did was just applied some of my gloss black vinyl material onto the lower window trim pieces and on the small rear quarter window vertical pillar that had also faded.

If there is enough interest in this, I can set up a group buy type of deal for it and have a group of you guys come by in on an assigned day to all get it done.

Before:




During (only the lower rear door trim piece is covered in the gloss black vinyl in these pictures):






After:








-Don

donathon@gmail.com

ELO168

Don, want to black out all the trims on my C63.
Front grill, window trim and rear including the emblems
Might do the roof too if the price is right.
Let me know how much.
Thanks/Edmond

Don Nguyen

PM sent.

I've had quite a few requests for tinting tail lights recently, so I decided to post up some more pictures of them for you guys. The owner of this car was actually a firefighter at a station local/right down the street from me in Irvine, so I dropped by there to tint/smoke the tail lights and the top portion of the headlights on his black E60 550i.

Tinted/smoked left side, stock/untinted right side:




Both sides tinted:


Top portion of the headlights tinted/smoked:




-Don

donathon@gmail.com

Don Nguyen

I worked on this black Bentley GT Continental coupe a while back. He brought his car by to have me black out the chrome window trim on his car. Originally he was going to go with gloss black, but once he got here we decided to go with the matte black to still give the covered pieces some contrast with the rest of the car. Also wrapped the chrome accents that were along the bottom of the car and his door handles. He was around Mission Viejo or so and came out to me in Anaheim Hills/Orange County.

Before:




After:














-Don

donathon@gmail.com

Don Nguyen

One of my previous customers that had me vinyl wrap the roof on his 335i E92 sold his car and got a new car. He purchased the new limited edition matte black C63 coupe from Mercedes. Everything looked good on the car, except for the chrome window trim that blatantly stood out, especially against the matte black paint on the rest of the car. It's not often that I get a matte black car that comes in to have their window trim vinyl wrapped. He decided to go with gloss black for the window trim, to give it some contrast still, and I think it turned out great.

Before:




After:








-Don

donathon@gmail.com

Don Nguyen

I'll try and change things up a bit here. Here's a silver Honda Civic that came by to get his roof wrapped in my matte black vinyl material versus gloss black which most people usually go with. This will help others who have a silver car or a glass sunroof and want to see what a matte black vinyled roof would look like on their car and how it contrasts, etc. The owner of this car was from Irvine/Orange County as well.

Before:




After:








Blacked out the chrome trunk handle piece on the rear:


-Don

donathon@gmail.com

Don Nguyen

Trying to gauge if there is any interest in this flat black vinyl finish. I haven't posted pictures of this finish/material before, but I recently had a someone ask if I had something that was flatter than my matte black vinyl material. So, who's interested?

Flat black is on the left and matte black is on the right:




-Don

donathon@gmail.com

Don Nguyen

I've been running a special on the 3M Di-noc matte carbon fiber vinyl wraps and the owner of this silver ISF drove up from San Diego to me in Orange County to have it done. This is the matte carbon fiber finish. I wrapped both his roof and his side door pillars with the 3M di noc material. I thought it looked great against the silver paint/color of the car. The cf pattern really gave this ISF a more aggressive presence. It also matched the darker wheels fairly well also.

Before:




After:
















-Don

donathon@gmail.com

Don Nguyen

Nothing fancy this time around. I vinyl wrapped the trunk handle, which was the last piece of chrome that was on this sapphire black 550 GT. The owner of this car was in Irvine as well. This will help out those who've asked me what my gloss black vinyl material looks like against metallic black paint/finishes. There's still a slight contrast to it, which I think is cool, so it still accents the trim pieces on the car a bit versus just blending in completely.







-Don

donathon@gmail.com

Don Nguyen

Even though I mainly specialize in European cars, interestingly enough, I have still had quite a few of these new Kia Optimas come by to get work done on their cars. I had this customer e-mail me to see if I could vinyl wrap the roof of his white Kia Optima with my gloss black vinyl material to give the roof that panoramic roof look/effect. Even though the roof of this car protruded outwards in the middle, unlike most cars, I was still able to wrap the roof without any issues.











-Don

donathon@gmail.com

Don Nguyen

I vinyl wrapped the roof of this brand new white Mercedes-benz C250 with my gloss black vinyl material. The owner of this car was from around the Los Angeles/Torrance area and drove out to me in Orange County to have his roof done. It's always fun seeing new car models/face lifts come out and come by to get some vinyl work done.









-Don

donathon@gmail.com