Don Nguyen

This is not exactly what I normally post, but for some reason I had two cars come in on the same day to have me do the same thing on both cars. Both cars had roof rails that were starting to corrode / fake / peel, and they wanted me to wrap them in vinyl to cover up the imperfections and give the pieces a consistent finish again. Ideally, the pieces should be smooth for the best results, but worse comes to worse, even if they aren't smooth, at least they are one color/finish again after being wrapped.

First car had silver / chrome roof rails and they wanted me to wrap it in gloss black. Second car had factory matte black roof rails, and they wanted me to just rewrap them in my matte black vinyl finish. The pictures aren't the best, since I was fairly busy that day and I wasn't even sure if I was going to be using these pictures later on as well.

Before:




After:




Before:


After:


-Don Nguyen

donathon@gmail.com

Don Nguyen

I had this brand new white BMW F30 335i sedan come by to have me vinyl wrap their car's roof in my gloss black vinyl material. I think this is the first mod that the owner of this car did. Just goes to show that getting a black roof done looks good by itself or as finishing touches to a car that already has other modifications done to it. I believe the owner of this car was around Orange County as well and drove out to me in Anaheim Hills to get the work done. We went with gloss black on this car to match his already factory gloss black mirrors and window trim pieces.

Before:




After:
















-Don Nguyen

donathon@gmail.com

Don Nguyen

I forgot to take some before pictures of this car, but I am sure you guys can imagine what it might have looked like before/stock. The owner of this car had me vinyl wrap the roof of his white BMW E92 335i coupe with my gloss black material. In addition to his roof, I also wrapped his chrome / brushed aluminum window surround in my gloss black vinyl material as well to match the roof. Small changes, but it really made the car pop a lot more. I thought with the addition of the black roof and window trim, it really made the car a lot cleaner and everything flows nicely even with the contrasting roof. He drove out to me in Orange County / Anaheim Hills to get the work done. I believe the owner of the car was from around Los Angeles area/county or something like that.

















-Don Nguyen

donathon@gmail.com

Don Nguyen

The owner of this silver E46 M3 coupe came by to have me vinyl wrap the roof of his new-to-him car with the 3M di-noc matte carbon fiber vinyl finish. The owner of this car was from around LA and drove out to me in Anaheim Hills / OC to get the work done. The matte roof went well with his gunmetal / darker grey colored wheels. The owner wanted to go for that CSL style look, so this is what the results were:

Before:




After:
















-Don Nguyen

donathon@gmail.com

Don Nguyen

This is one of my favorite mods to do on cars. My other favorite is getting rid of the chrome on cars. Tinting the tail lights light like this really gives the car a OEM+ look. It's good for cars that want to change up the look of the car a bit, without making it very obvious or noticeable what was done. However, that doesn't mean that this won't work or look good on modified car as well. I also like the light tint because it's less likely to get you pulled over, since so many cars come with slightly darker tail lights from the factory already as it is (IE BMW blacklines for their tail lights, etc).

Before:




After:






-Don Nguyen

donathon@gmail.com

Don Nguyen

Starting to get more of the new BMW 3 series F30 bodies come in like this white 328 sedan. I vinyl wrapped the roof on this car in my gloss black vinyl material. This car was pretty interesting because it did not have a sunroof, which most newer cars always comes with. Turned out nice. Mirrors were already black from the factory as well as the shadowline window trim on the car. The owner of the car drove out to me in Orange County / Anaheim Hills to get the work done.

Before:




After:














-Don Nguyen

donathon@gmail.com

Don Nguyen

The owner of this brand new black Porsche Cayenne Hybrid had me vinyl wrap the chrome window trim/surround on his car with my gloss black vinyl material. We went with the gloss black to match the B pillars of his car, which were also already gloss black from the factory. It really changed the look of the car, especially with the tinted windows and black wheels that he had. The owner of this car was also in Orange County.

Before:






After:






-Don Nguyen

donathon@gmail.com

Even Money

How well does the 3m carbon fiber dinoc work on chrome trim?

Don Nguyen

Just fine.

Don Nguyen

The owner of this white Audi R8 was getting other work done on the car and he decided to have me tint his headlights with my light smoke/tint film as well. The owner of this car was from around the Los Angeles county area and drove out to me in Orange County to get the work done. I took some pictures of the car with the headlights off and the parking lights on to show how the light transmission looked like after the install was done. Over, it gave it a nice meaner look without reducing overall light output by anything too much.

Before:




During - Driver (right) side tinted/smoked, passenger (left) side stock.


After:






-Don Nguyen

donathon@gmail.com

Don Nguyen

For the roof of this white Nissan 370z, I vinyl wrapped it in the 3M dinoc matte carbon fiber material. I did not take before pictures, since time was against my side, but I am sure you can imagine how it probably looked like before. I think the cf went well with the overall styling of the rest of the car. The owner of this car was from around Redlands or Riverside county and drove out to me in Orange County/Anaheim Hills to get the work done.











-Don Nguyen

donathon@gmail.com

Don Nguyen

The owner of this grey/gunmetal colored Mercedes Benz C63 AMG had me vinyl wrap the chrome / brushed aluminum window trim/surround on his car with my matte black vinyl material. The owner wanted the shadowline look. In addition to the window trim, I also vinyl wrapped the b pillars and trunk handle on his car with the 3M dinoc matte carbon fiber material. It's a nice little finishing touch on the car and I think it went well with the overall theme and color of the car.

Before:








After:










-Don Nguyen

donathon@gmail.com

Don Nguyen

Just as a side note for those who are keeping track or paying attention when my next Norcal trip is going to be. I am probably going to be going back up there in about 4-6 weeks. When I have an exact date down, I'll make a dedicated thread for it for those who are interested to sign up.

The owner of this silver BMW E39 540i sedan came by to have me vinyl wrap the roof of his car with my gloss black vinyl material. We went with gloss black over matte black for his car. Overall, it went very well with the look and styling of his car fairly well.

Before:




After:












-Don Nguyen

donathon@gmail.com

Don Nguyen

For this new white Mercedes Benz CLS550 sedan, I vinyl wrapped the tail lights with my light tint/smoke film material. On this car, I we decided to do the whole tail light. I didn't take pictures of it before, but the first picture does show the driver side as tinted/smoked (left) and the passenger (right) untinted. The lighting of it inside kind of makes it hard to gauge, but in the other pictures where I took them outside will help you better see the differences. As you can notice, as the lighting changes, the appearance of the darkness of the shade changes as well.









-Don Nguyen

Donathon@gmail.com

Ekort

when are you gonna be back in norcal? Interested in having the chrome trims wrapped with carbon fiber vinyl. Please pm me the price. Thanks

Don Nguyen

At the moment, I am looking at possibly in 4-6 weeks.

-Don

Don Nguyen

Here is a white VW Mk6 that had me vinyl wrap the roof of his car with the 3M dinoc matte carbon fiber vinyl. I wrapped the material around the antenna and did the top rear hatch part as well. The carbon look adds a nice touch to the car. The owner of this car drove out to me in Anaheim Hills / Orange County to have the work done. I took a picture of the side of the roof where the material end, since people usually ask what it looks like for cars that do not have rails/etc.























-Don Nguyen

donathon@gmail.com

mrl0n3ly714

please check your PM for the quote full wrap

Don Nguyen

Not sure if I got anything from you.

The owner of this car had me black out the chrome/brushed aluminum window trim on his brand new white Mercedes Benz E350. We went with the matte black finish for around the window trim area. In addition to the window trim, he also had me wrap the middle center section of his front bumper in my gloss black vinyl material. He drove out to me in Anaheim Hills/Orange County to have the vinyl work done.

Before:






After:










-Don Nguyen

donathon@gmail.com

Don Nguyen

Here is an example of a stock white Mercedes Benz C300 sedan that came in to have me vinyl their roof in my gloss black vinyl material. Even though the owner of this car was going to leave his car relatively stock, the black roof was still a nice addition to the car, which gave it an OEM+ look. The owner of this car drove out to me in Orange County / Anaheim Hills to get the vinyl work done. The only thing I would have suggested him to also get done was to black out the chrome window trim around the doors and the chrome trunk handle piece in the back. That would have really set the car off fairly nicely.

Before:




After:










-Don Nguyen

donathon@gmail.com

Don Nguyen

The owner of this brand new white VW TDI wagon brought his car by to have me lightly tint / smoke the tail lights and third brake light on his car. I took some pictures from side to side, showing how the tint looks like in directly sunlight and in some shade. As you can see, it's fairly dynamic and changes depending on the lighting. I haven't had anyone have any issues with this shade though, as far as light output or having any issues with law authorities though, so that is a plus. The owner of this car I believe was from around Pasadena and drove out to me in Anaheim Hills / Orange County to get the work done.

Before:




During (driver/left side tinted, passenger/right side stock) -




After:










-Don Nguyen

donathon@gmail.com

Don Nguyen

I've had a couple of people ask me to post some more pictures of the 3M 1080 gloss carbon fiber finish, so here is a white Lexus IS350 sedan that I vinyl wrapped the roof with in that material. Also note, the roof spoiler is a real carbon piece, so this will also help give those an idea of how the vinyl material compares/contrast against real carbon. The owner of this car drove out to me in Anaheim Hills / Orange County to get the work done. We went with the 3M 1080 gloss carbon fiber vinyl finish over the 3M di-noc matte carbon fiber finish to closer match real cf and go with his roof spoiler better.

Before:




After:










-Don Nguyen

donathon@gmail.com

Don Nguyen

People usually ask me if they should go with gloss black or matte black for the window trim on their black cars, so here is an example of matte black on this brand new BMW F10 sapphire metallic 5 series sedan. With the black wheels on the car, it made the chrome window trim stand out even more. So you can see the differences of the before and after are quite drastic, even for such a small detail. The owner of this car was also around/from Orange County and drove out to my shop in Anaheim Hills. I liked the end results and how this car turned out with the black vinyl trim.

Before:




After:










-Don Nguyen

donathon@gmail.com

Don Nguyen

Tinted / smoked the center clear portion of the tail lights on this brand new white Mercedes E350 sedan. In addition to tinting the tail lights with my light film material, I also wrapped the trunk spoiler in the 3M 1080 gloss carbon fiber material and blacked out the chrome trunk handle with my matte black vinyl material. Overall, the light shade of tint was a nice slight change in the look of the car, without making it too dark and is still visible during the day/night.

Most spoilers aren't practical to wrap, but this one happen to work out.

Before:




Driver side tinted/smoked - passenger side stock:


After:












-Don Nguyen

donathon@gmail.com

Don Nguyen

I thought I had taken more pictures of this car, but three is all I have I suppose. This is a car that I did for Hyundai for last year's SEMA, just to give you an idea of how some old some of my pictures can be or take before getting uploaded. They wanted to do a real carbon roof, but did not have enough time to do it before SEMA, so having me vinyl wrap it with the 3M dinoc matte carbon fiber vinyl material was the next alternative. I wrapped both the painted and glass part that's on the Veloster.







-Don Nguyen

donathon@gmail.com