Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
#26
Former Vendor of MBWorld
Thread Starter
That is some damn good wrapping and tinting!
Too bad I don't know where to go to get the chrome blacked out on the 63; at least anywhere local..
That 135i looks really good!
Do you mind disclosing where you buy your product from? I'd be interested in seeing if I could possible do a 'DIY'. If anything, I'll just find some cheapo stuff off of eBay.
Too bad I don't know where to go to get the chrome blacked out on the 63; at least anywhere local..
That 135i looks really good!
Do you mind disclosing where you buy your product from? I'd be interested in seeing if I could possible do a 'DIY'. If anything, I'll just find some cheapo stuff off of eBay.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
-Don
#27
Former Vendor of MBWorld
Thread Starter
Gloss black (Don't mind the blue tape, he just recently had those pieces painted and he had to take a road trip to get to where I was to get vinyl work done):
![](http://www.wannaberacer.com/dowork/dowork330.jpg)
![](http://www.wannaberacer.com/dowork/dowork331.jpg)
![](http://www.wannaberacer.com/dowork/dowork332.jpg)
![](http://www.wannaberacer.com/dowork/dowork333.jpg)
![](http://www.wannaberacer.com/dowork/dowork334.jpg)
-Don
![](http://www.wannaberacer.com/dowork/dowork330.jpg)
![](http://www.wannaberacer.com/dowork/dowork331.jpg)
![](http://www.wannaberacer.com/dowork/dowork332.jpg)
![](http://www.wannaberacer.com/dowork/dowork333.jpg)
![](http://www.wannaberacer.com/dowork/dowork334.jpg)
-Don
#30
Former Vendor of MBWorld
Thread Starter
#33
Senior Member
Join Date: Apr 2010
Location: Taiwan
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
C63 w/p30; MHP ECU tune+header+mids+CF air intake duct+Akrapovic+wide body kit+ Vorsteiner VS110
Can you also post more closer pictures for side mirror? Can you do all mirror including all the base(including triangle part on car body) linked to car body?
#34
Former Vendor of MBWorld
Thread Starter
I am in Socal, so I don't think I'd be able to do any work for you unfortunately ![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Those are all of the pictures I have of the mirrors on that 1 series I think.
-Don
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Those are all of the pictures I have of the mirrors on that 1 series I think.
-Don
#35
MBWorld Fanatic!
This is very nice work .. I would like wrap my front grill with black vinyl and also the part that rounded by red on the picture
![](http://img401.imageshack.us/img401/8850/86719395.jpg)
Uploaded with ImageShack.us
PM me the price please
![](http://img401.imageshack.us/img401/8850/86719395.jpg)
Uploaded with ImageShack.us
PM me the price please
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#36
Former Vendor of MBWorld
Thread Starter
How about a full s2k wrapped in the 3M CF material?
Tested the curves etc a bit with some matte black first. Just did the one driver side fender and hood:
![](http://wannaberacer.com/fullwrap/fullwrap11.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap12.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap13.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap14.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap15.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap16.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap17.jpg)
Once I got a feel for it, I went ahead and did the full CF treatment on the car. Probably one of the first cars on the east coast to have this fully done (this car was done a long time ago, but the owner's been constantly building it, so it hasn't even seen the roads yet after being fully wrapped):
![](http://wannaberacer.com/fullwrap/fullwrap18.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap19.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap20.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap21.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap22.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap23.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap24.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap25.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap26.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap27.jpg)
So what do you guys think? Who will you be bringing your cars to get wrapped now![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
-Don
Tested the curves etc a bit with some matte black first. Just did the one driver side fender and hood:
![](http://wannaberacer.com/fullwrap/fullwrap11.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap12.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap13.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap14.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap15.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap16.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap17.jpg)
Once I got a feel for it, I went ahead and did the full CF treatment on the car. Probably one of the first cars on the east coast to have this fully done (this car was done a long time ago, but the owner's been constantly building it, so it hasn't even seen the roads yet after being fully wrapped):
![](http://wannaberacer.com/fullwrap/fullwrap18.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap19.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap20.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap21.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap22.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap23.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap24.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap25.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap26.jpg)
![](http://wannaberacer.com/fullwrap/fullwrap27.jpg)
So what do you guys think? Who will you be bringing your cars to get wrapped now
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
-Don
#38
Former Vendor of MBWorld
Thread Starter
#43
Former Vendor of MBWorld
Thread Starter
Some pictures on a 997 GT3 that I wrapped the 3M Di-Noc CF with, on the roof and spoiler element. Let me tell you, it looked hot! Haha. The car was less than 24 hours old, off of the dealership lot.
![](http://www.wannaberacer.com/dowork/dowork268.jpg)
![](http://www.wannaberacer.com/dowork/dowork269.jpg)
![](http://www.wannaberacer.com/dowork/dowork270.jpg)
![](http://www.wannaberacer.com/dowork/dowork271.jpg)
![](http://www.wannaberacer.com/dowork/dowork272.jpg)
![](http://www.wannaberacer.com/dowork/dowork273.jpg)
![](http://www.wannaberacer.com/dowork/dowork274.jpg)
![](http://www.wannaberacer.com/dowork/dowork275.jpg)
![](http://www.wannaberacer.com/dowork/dowork276.jpg)
-Don
![](http://www.wannaberacer.com/dowork/dowork268.jpg)
![](http://www.wannaberacer.com/dowork/dowork269.jpg)
![](http://www.wannaberacer.com/dowork/dowork270.jpg)
![](http://www.wannaberacer.com/dowork/dowork271.jpg)
![](http://www.wannaberacer.com/dowork/dowork272.jpg)
![](http://www.wannaberacer.com/dowork/dowork273.jpg)
![](http://www.wannaberacer.com/dowork/dowork274.jpg)
![](http://www.wannaberacer.com/dowork/dowork275.jpg)
![](http://www.wannaberacer.com/dowork/dowork276.jpg)
-Don
#45
Former Vendor of MBWorld
Thread Starter
Some before and after pictures. This is the first time I've taken pictures before applying the vinyl roof, so it'll give you guys somewhat of an idea of how it looks like.
Gloss black:
![](http://www.wannaberacer.com/dowork/dowork352.jpg)
![](http://www.wannaberacer.com/dowork/dowork353.jpg)
![](http://www.wannaberacer.com/dowork/dowork354.jpg)
![](http://www.wannaberacer.com/dowork/dowork355.jpg)
![](http://www.wannaberacer.com/dowork/dowork356.jpg)
-Don
Gloss black:
![](http://www.wannaberacer.com/dowork/dowork352.jpg)
![](http://www.wannaberacer.com/dowork/dowork353.jpg)
![](http://www.wannaberacer.com/dowork/dowork354.jpg)
![](http://www.wannaberacer.com/dowork/dowork355.jpg)
![](http://www.wannaberacer.com/dowork/dowork356.jpg)
-Don
#49
Former Vendor of MBWorld
Thread Starter
Installed gloss black vinyl on the window trim of this E46 M3 and tinted his tail lights.
I probably should have done a better job of cleaning the window trim before taking the pictures. There's palm/finger prints from me installing all over it, haha.
![](http://www.wannaberacer.com/trim/trim22.jpg)
![](http://www.wannaberacer.com/trim/trim23.jpg)
![](http://www.wannaberacer.com/trim/trim24.jpg)
![](http://www.wannaberacer.com/trim/trim25.jpg)
![](http://www.wannaberacer.com/trim/trim26.jpg)
![](http://www.wannaberacer.com/trim/trim27.jpg)
-Don
I probably should have done a better job of cleaning the window trim before taking the pictures. There's palm/finger prints from me installing all over it, haha.
![](http://www.wannaberacer.com/trim/trim22.jpg)
![](http://www.wannaberacer.com/trim/trim23.jpg)
![](http://www.wannaberacer.com/trim/trim24.jpg)
![](http://www.wannaberacer.com/trim/trim25.jpg)
![](http://www.wannaberacer.com/trim/trim26.jpg)
![](http://www.wannaberacer.com/trim/trim27.jpg)
-Don