Feb. 18th MIR--Rool call and Predictions
02-04-2011, 12:50 PM
#51
MBWorld Fanatic!
02-04-2011, 01:04 PM
#52
Former Vendor of MBWorld
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
Saying that, I think that I will be very happy when I see you guys setting the bar at a really high mark for 2011. Should be a good day and it'll be nice to hopefully witness some really incredible times.
Last edited by Staff@RPM; 02-04-2011 at 01:07 PM.
02-04-2011, 01:10 PM
#53
Out Of Control!!
I just talked to the track and there is 0 snow there right now. Hopefully it stays that way
AND he said he will stay on prep all day in both lanes to make sure track is fast!
AND he said he will stay on prep all day in both lanes to make sure track is fast!
Last edited by blackbenzz; 02-04-2011 at 01:16 PM.
02-04-2011, 01:23 PM
#54
MBWorld Fanatic!
Common fellas Everytime we go to MIR track prep is top, Ahmad stays on top of this so we can all go fast,(you won't find better track prep) So get you asses out and come have some fun, Trust me with me mike and Keith being there from the 63 crowd there will be alot of info spilled that day.
02-05-2011, 11:33 AM
#58
Former Vendor of MBWorld
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
02-05-2011, 12:55 PM
#61
MBWorld Fanatic!
Not worth starting a new thread, BUT OT nonetheless
How do you guys remove your seats without getting a Service light? or you get the light but it goes away when you put the seat back in? (i think I know how to remove it, just 4 torx bolts, disconnect wires, bam)
How do you guys remove your seats without getting a Service light? or you get the light but it goes away when you put the seat back in? (i think I know how to remove it, just 4 torx bolts, disconnect wires, bam)
02-05-2011, 02:12 PM
#62
Former Vendor of MBWorld
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
We haven't tried getting rid of the light yet. It should go away when you put the seat back in, you may need to reset it. You would probably need to add a resistor to the harness to trick the computer into thinking that the seat was still in the car to remove it. Everything you would need to do it is readily available at your local Radio Shack I am sure.
02-05-2011, 02:28 PM
#65
Former Vendor of MBWorld
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
02-05-2011, 04:10 PM
#68
Former Vendor of MBWorld
Join Date: Feb 2005
Location: Long Island, NY
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
OE-tune.
02-05-2011, 08:08 PM
#70
MBWorld Fanatic!
