Eyebrow LEDs not working
#1
MBWorld Fanatic!
Thread Starter
Eyebrow LEDs not working
Hey guys,
I am trying to install my AZN optics leds for the eyebrows but am having trouble. I have followed the diy but only one led is lighting up on each eye brow (outermost driver side led and innermost passenger side led.)
When I removed the stock bulbs they were lighting up fine but now when I put the stock bulbs back in after testing the LEDs, the stock bulbs wont light either.
I've checked the fuses and they all seem OK. I'm very frustrated - any help would be appreciated. Thanks!
I am trying to install my AZN optics leds for the eyebrows but am having trouble. I have followed the diy but only one led is lighting up on each eye brow (outermost driver side led and innermost passenger side led.)
When I removed the stock bulbs they were lighting up fine but now when I put the stock bulbs back in after testing the LEDs, the stock bulbs wont light either.
I've checked the fuses and they all seem OK. I'm very frustrated - any help would be appreciated. Thanks!
#2
Senior Member
Join Date: Jan 2008
Location: Des Plaines, IL
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
12 M156 C204
were you aware of the polarity of the led bulbs?
are your stock bulbs good?
are the metal fins inside the sockets having good contacts with the conductors?
calm down first, i don't think you are having a big trouble here.
are your stock bulbs good?
are the metal fins inside the sockets having good contacts with the conductors?
calm down first, i don't think you are having a big trouble here.
#5
MBWorld Fanatic!
#7
Senior Member
Join Date: Jul 2002
Location: Bay Area, CA
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
2010 C63, 2007 X5
+1 If the first time you insert it the incorrect way the CAN-BUS sensor will detect an error on the bulb/wire and turn off the power to that bulb. You need to flip the LED around, restart the car, and turn on the lights.