MHP Longtubes & Mids just arrived!!!
#1
MBWorld Fanatic!
Thread Starter
MHP Longtubes & Mids just arrived!!!
And what a thing of beauty they are. Much thanks to Andy for the great customer service, quick turnaround, and clearly an amazing product. If these headers perform half as well as they look, I'm in for a belated Halloweeen treat.
Install is set for this Friday, Nov 4 through James at ACGSD, at which time the Kleemann longtube header tune file will also be flashed. Then it's off to the races!
Will post results as soon as available.
Install is set for this Friday, Nov 4 through James at ACGSD, at which time the Kleemann longtube header tune file will also be flashed. Then it's off to the races!
Will post results as soon as available.
Trending Topics
#8
MBWorld Fanatic!
I think he may have had K1 before, so it would be a cheap upgrade. I've seen MHP LTs and K2 on the dyno at about 455 whp, 430 wtq. At the track is where you'll see an improvement with the MHP tune.
#10
MBWorld Fanatic!
Thread Starter
Believe me, I wanted the MHP v3 CDT tune, but simply couldn't afford to have my car down for 3 days while I mail out the ECU to Andy. I decided the second best route was to go with the Kleemann longtube file that James could load at time of header install. I've been assured that tune will still work very well with the MHP hardware.
#11
MBWorld Fanatic!
Thread Starter
Given my strong stock results of 385whp/375wtq (posted in a separate thread), I'm hoping the MHP/Kleemann setup gets me another 90whp/45wtq to land right around the 475whp/420wtq mark. Same dyno, same conditions of course. I should be able to verify next week.
#12
MBWorld Fanatic!
That's true.
Given my strong stock results of 385whp/375wtq (posted in a separate thread), I'm hoping the MHP/Kleemann setup gets me another 90whp/45wtq to land right around the 475whp/420wtq mark. Same dyno, same conditions of course. I should be able to verify next week.
Given my strong stock results of 385whp/375wtq (posted in a separate thread), I'm hoping the MHP/Kleemann setup gets me another 90whp/45wtq to land right around the 475whp/420wtq mark. Same dyno, same conditions of course. I should be able to verify next week.
#15
MBWorld Fanatic!
Thread Starter
Thanks guys for all the encouragement. I really hope the setup does our C63 proud at the upcoming roll racing event on 11/11. Should be some interesting match-ups. I'm particularly interested in going up against the stock 2012 GTR in attendance...I think I stand a good chance with his launch advantage removed.
Last edited by xtyper; 11-02-2011 at 08:46 PM.
#16
Senior Member
Join Date: Feb 2011
Location: Los Angeles
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
2016 G550
Thanks guys for all the encouragement. I really hope the setup does the C63 proud at the upcoming roll racing event on 11/11. Should be some interesting match-ups. I'm particularly interested in going up against the stock 2012 GTR in attendance...I think I stand a good chance with his launch advantage removed.
Last edited by enochroot; 11-02-2011 at 08:47 PM. Reason: premature enter.
#17
MBWorld Fanatic!
Thanks guys for all the encouragement. I really hope the setup does our C63 proud at the upcoming roll racing event on 11/11. Should be some interesting match-ups. I'm particularly interested in going up against the stock 2012 GTR in attendance...I think I stand a good chance with his launch advantage removed.
It doesn't hurt trying though, I think the GTR will pull on the start and you will be able to keep up a few cars behinds maintaining the speed.
#18
MBWorld Fanatic!
Eric,
I received mines about 2and a half weeks ago and have a schedule install time for a week and a half or so. I haven't posted because I want to have it all install then I will do a review. Good luck with your install. Please PM me with how much the shop is charging you. Thanks!
I received mines about 2and a half weeks ago and have a schedule install time for a week and a half or so. I haven't posted because I want to have it all install then I will do a review. Good luck with your install. Please PM me with how much the shop is charging you. Thanks!
#21
MBWorld Fanatic!
Thread Starter
Yes, got them installed at ACGSD last Friday as planned, however they proved too loud for my daily driving habits that often includes my 3-year old daughter. James happened to have a quieter, catted MBH setup in stock that he was willing to swap me for, so I made the switch back to that. Part of me is disappointed since I was really looking forward to trying out the MHP setup, but I'm also very happy with the additional power restored to my car with the MBH/Kleemann setup.
A big thanks again to Andy for the great customer and high quality product. To anyone without noise concerns, I highly recommend the MHP setup.
Stay tuned for the power results of my MBH/Kleemann setup.
A big thanks again to Andy for the great customer and high quality product. To anyone without noise concerns, I highly recommend the MHP setup.
Stay tuned for the power results of my MBH/Kleemann setup.
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
#22
MBWorld Fanatic!
Join Date: Aug 2005
Location: North Jersey
Posts: 2,207
Likes: 0
Received 2 Likes
on
2 Posts
2012 CTS-V
Yes, got them installed at ACGSD last Friday as planned, however they proved too loud for my daily driving habits that often includes my 3-year old daughter. James happened to have a quieter, catted MBH setup in stock that he was willing to swap me for, so I made the switch back to that. Part of me is disappointed since I was really looking forward to trying out the MHP setup, but I'm also very happy with the additional power restored to my car with the MBH/Kleemann setup.
A big thanks again to Andy for the great customer and high quality product. To anyone without noise concerns, I highly recommend the MHP setup.
Stay tuned for the power results of my MBH/Kleemann setup.![drive](https://mbworld.org/forums/images/smilies/driving.gif)
A big thanks again to Andy for the great customer and high quality product. To anyone without noise concerns, I highly recommend the MHP setup.
Stay tuned for the power results of my MBH/Kleemann setup.
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
#23
MBWorld Fanatic!
Thread Starter
#24
Former Vendor of MBWorld
In an interesting twist of events. Welcome back
. Andy sells a fine product. In the end we have many customers where being the loudest on the street isn't their main goal. This combined with our modular mid-section set up makes it possible to meet the needs and wants of different customers. That's why we offer extra resonator options for people who want the power, but not so much the sound that running catless brings. In turn it helps keep the performance numbers up while calming the noise level a bit. These days the extra resonator option in our mid-section is becoming a popular choice.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)