Hello guys, first post but have been reading for a couple months now.
Current owner of an S4 but about to pull the trigger on a 2010 C63. The car isn't located at a MB dealer so it makes it a bit tougher to find quality information about it. I was looking to see if I could get some help decoding the VIN. I called two separate MB dealerships for help (they were very helpful) but were unable to print or email me anything and couldn't really give me options on the vehicle clearly (the service department doesn't see things like MSRP sheets, etc.).
So, that brings me to you guys...can anyone help decode the following VIN to see the factory options installed on the car?
WDDGF7HB9AF391293
Thanks!
Ben
Current owner of an S4 but about to pull the trigger on a 2010 C63. The car isn't located at a MB dealer so it makes it a bit tougher to find quality information about it. I was looking to see if I could get some help decoding the VIN. I called two separate MB dealerships for help (they were very helpful) but were unable to print or email me anything and couldn't really give me options on the vehicle clearly (the service department doesn't see things like MSRP sheets, etc.).
So, that brings me to you guys...can anyone help decode the following VIN to see the factory options installed on the car?
WDDGF7HB9AF391293
Thanks!
Ben
Quote:
Current owner of an S4 but about to pull the trigger on a 2010 C63. The car isn't located at a MB dealer so it makes it a bit tougher to find quality information about it. I was looking to see if I could get some help decoding the VIN. I called two separate MB dealerships for help (they were very helpful) but were unable to print or email me anything and couldn't really give me options on the vehicle clearly (the service department doesn't see things like MSRP sheets, etc.).
So, that brings me to you guys...can anyone help decode the following VIN to see the factory options installed on the car?
WDDGF7HB9AF391293
Thanks!
Ben
Here You go.Originally Posted by bbretzman
Hello guys, first post but have been reading for a couple months now. Current owner of an S4 but about to pull the trigger on a 2010 C63. The car isn't located at a MB dealer so it makes it a bit tougher to find quality information about it. I was looking to see if I could get some help decoding the VIN. I called two separate MB dealerships for help (they were very helpful) but were unable to print or email me anything and couldn't really give me options on the vehicle clearly (the service department doesn't see things like MSRP sheets, etc.).
So, that brings me to you guys...can anyone help decode the following VIN to see the factory options installed on the car?
WDDGF7HB9AF391293
Thanks!
Ben
Regards,
Joe
Joe,
Thanks so much for this. Interesting it says grey leather, in the pics I see online looks almost White. This is the exact info I needed.
Thanks again!
Ben
Thanks so much for this. Interesting it says grey leather, in the pics I see online looks almost White. This is the exact info I needed.
Thanks again!
Ben
Senior Member
Ok, time to test you guys here. I was reading the VIN decode that Joe supplied above which shows the P30 package on the 2010 car. That is all fine and dandy but I see on the car I am looking to purchase it has the carbon rear spoiler.
Also, pulling up the Pictures thread I see that crazy1eye listed have a P31 package. He shows a carbon rear on his car.
I guess what I am confused with is I didn't think the P30 came with the option.
Any thoughts other than someone just put it on there?
Also, pulling up the Pictures thread I see that crazy1eye listed have a P31 package. He shows a carbon rear on his car.
I guess what I am confused with is I didn't think the P30 came with the option.
Any thoughts other than someone just put it on there?
I believe he has access to a MB Parts system online.
Quote:
Hey Joe, can you please do mine
WDDGF7HBXAF451470
Thanks!
Here you go.Originally Posted by crazy1eye
Cool!Hey Joe, can you please do mine

WDDGF7HBXAF451470
Thanks!
Quote:
Yes I do, and anyone can have access. Go to:Originally Posted by bbretzman
I believe he has access to a MB Parts system online.
http://epc.startekinfo.com/epc/
and sign up for a one year free subscription. Great for VIN decoding and searching for parts. It's a live database so parts are always current.
Regards,
Joe
Member
Quote:
Also, pulling up the Pictures thread I see that crazy1eye listed have a P31 package. He shows a carbon rear on his car.
I guess what I am confused with is I didn't think the P30 came with the option.
Any thoughts other than someone just put it on there?
This should help clarify things a bit:Originally Posted by bbretzman
Ok, time to test you guys here. I was reading the VIN decode that Joe supplied above which shows the P30 package on the 2010 car. That is all fine and dandy but I see on the car I am looking to purchase it has the carbon rear spoiler. Also, pulling up the Pictures thread I see that crazy1eye listed have a P31 package. He shows a carbon rear on his car.
I guess what I am confused with is I didn't think the P30 came with the option.
Any thoughts other than someone just put it on there?
Senior Member
Quote:
Originally Posted by Valvestud
Here you go.
Quote:
Great, thanks guys Originally Posted by deeoh
This should help clarify things a bit:
Senior Member
OK, some say I have the P31 pack & yet it shows P30 on my spec sheet, so which is it? Being Canadian, the pack includes the LSD which in reality we pay for seeing the package is listed at $7800CDN in 2010 vs $5950US + $2000US for the LSD.
Mort
MBWorld Fanatic!
close
- Join DateFeb 2010
- Posts:5,626
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
-
Likes:172
-
Liked:479 Times in 394 Posts
I have a 2010 Canadian C63 and the LSD was not part of the P31 package and I had to order it separately as code 471. I don't think it was added in to the APX Package until 2011. In 2010 APX-AMG PPP (P31) was $6000 and 471-LSD was $2400. You will need to check if your car has option code 471 if you want to know for sure that you have the LSD.
Senior Member
Quote:
Ya your right, the 2011 APX package was $7800.CDNOriginally Posted by Mort
I have a 2010 Canadian C63 and the LSD was not part of the P31 package and I had to order it separately as code 471. I don't think it was added in to the APX Package until 2011. In 2010 APX-AMG PPP (P31) was $6000 and 471-LSD was $2400. You will need to check if your car has option code 471 if you want to know for sure that you have the LSD.
I found a site called car cost Canada which lists the MSRP & all options, it shows 2 packages, APP $4000 which includes the LSD & also APX for $6000. & also the LSD for $2400 like you said, i guess I'll have to dig deeper.
http://carcostcanada.com/1/en/CCC_Ve...kModel=C-Class
According to my spec sheet Joe posted above, I do not have an LSD, no 471.
*** I stopped by the dealer & talked to the AMG salesman. he showed me on the computer that in '09 the LSD was included in the P30 pack here in Canada, but in '10 it was not. ***
Sorry Ben for hijacking your thread

Super Member
Quote:
http://epc.startekinfo.com/epc/
and sign up for a one year free subscription. Great for VIN decoding and searching for parts. It's a live database so parts are always current.
Regards,
Joe
Great info, thanks!Originally Posted by Valvestud
Yes I do, and anyone can have access. Go to:http://epc.startekinfo.com/epc/
and sign up for a one year free subscription. Great for VIN decoding and searching for parts. It's a live database so parts are always current.
Regards,
Joe
Newbie
Hi Joe,
If you are able to do Australian cars, would you please decode my VIN: WDB2093772F234732
Thanks,
Rob
If you are able to do Australian cars, would you please decode my VIN: WDB2093772F234732
Thanks,
Rob
Quote:
If you are able to do Australian cars, would you please decode my VIN: WDB2093772F234732
Thanks,
Rob
Sorry, it apparently only allows datacard viewing for U.S. cars.Originally Posted by Rob63
Hi Joe,If you are able to do Australian cars, would you please decode my VIN: WDB2093772F234732
Thanks,
Rob
Regards,
Joe
MBWorld Fanatic!
hey joe, do you mind checking mine?
WDDGF7HB6AF414268
It's a Canadian car, so hopefully the app works for all NA cars
Thanks!
WDDGF7HB6AF414268
It's a Canadian car, so hopefully the app works for all NA cars
Thanks!
Senior Member
Quote:
WDDGF7HB6AF414268
It's a Canadian car, so hopefully the app works for all NA cars
Thanks!
Yes it does Originally Posted by noodleman
hey joe, do you mind checking mine?WDDGF7HB6AF414268
It's a Canadian car, so hopefully the app works for all NA cars
Thanks!
Newbie
Quote:
Regards,
Joe
Thanks for trying, I appreciate it.Originally Posted by Valvestud
Sorry, it apparently only allows datacard viewing for U.S. cars.Regards,
Joe
Does anybody know how to use this tool to get a paint code? It seems to clear out the VIN when I try to find it. THe VIN is 10806712005140 so maybe that has something to do with it (old car). Any help much appreciated!
Junior Member
Joe,
I'd like to check mine too if you don't mind WDDGF7HB6AF401973. I couldn't register for my own account to look it up for some reason.
Thanks!
I'd like to check mine too if you don't mind WDDGF7HB6AF401973. I couldn't register for my own account to look it up for some reason.
Thanks!
Quote:
I'd like to check mine too if you don't mind WDDGF7HB6AF401973. I couldn't register for my own account to look it up for some reason.
Thanks!
Engine serial number is 156985 60 049771 and is in the affected group.Originally Posted by AMGer
Joe,I'd like to check mine too if you don't mind WDDGF7HB6AF401973. I couldn't register for my own account to look it up for some reason.
Thanks!
Regards,
Joe
Newbie
Hello all, I just purchased a 2005 CLS 500, my first Mercedes by the way, and would like to get the data sheet for the car. Can someone help?
VIN: WDBTJ75J15F151226
Thanks in advance!
VIN: WDBTJ75J15F151226
Thanks in advance!





