IStern

$475 OBO

Brand new. Just unwrapped, haven't installed. I wanted a full carbon fiber diffuser, which is why I'm selling this one.

natman316

these arent real cf?

IStern

Just layer of CF on the outside.

natman316

oh thanks.

glws

mthis

Got any pix

IStern

This is the official product page http://www.jl-motoring.com/ProductDe...tCode=MBDI0451

padroncubans

uhmm ... i think your mistaken... the JL CF big fin diffuser is a direct replacement for the 2012 NOT an overlay... I bought, received and installed mine last month. It definitely was not an overlay. it even stats it on their website "Full replacement diffuser"

IStern

It is a full replacement diffuser, but it's not 100% carbon fiber.

sbce90

I'll take it.

Anthony C63

Hey, I purchased a CF Rear diffusor for my 2012 C63 AMG from JL Motoring. I have a sedan. I received my diffusor today but I don't have my car yet, it should be here in about 6 weeks. I have opened the package and it has some silver tabs on the edges, is that all I need to attach the new diffusor to my car?
Thanks

flooby

Yup that's all you need. I was kinda worried at first but its actually pretty secure.

Anthony C63

Thanks for that. Do you also have a facelift model?

flooby

Yup!

Anthony C63

Hi guys, me again.
So now I have finally received my C63 AMG... what a car! I have received the JL Motoring rear diffuser, and looks very nice. On Saturday I hope to remove the stock and replace with the CF one. I know how to remove the four little clips on the bottom of the diffuser (next to the exhaust tips) but don't know how to take the clips off along the top of the diffuser and going down the sides. Does anyone know how to unclip these?
Thanks! Anthony

natman316

those are rivets i just drilled them out. but basically your stock diffuser isnt going back on like that again LOL

Gremlin9

I just received my big fin diffuser and promptly got it opticoated.

Now I need to install it but I have no idea how to do it.

Do I need to remove the OEM diffuser or can I install the new diffuser over the old one?

If I do need to remove the OEM diffuser, how does the new diffusor attach to the car -- I see all these tabs but will I need to drill anything or use screws to attach it? Or use double sided tape?

Can anybody who installed the JL diffusor advise?

Thanks in advance.

AMGFANs

removed the old one and install the new one. I will be receiving mine by next week, I will try post pics and installation for the 2012+ model's.

BTW,there should be two hole for you to use screws to attach it. Should be either on the side or at the part where near exhaust line

Anthony C63

All you need to do is drill out the two rivvet-looking screws on either end of the stock diffuser near the exhaust tips, then the rest will just unclip with a bit of force, and you will just have to insert the tabs on the new one into the holes that the old one used, and then fold the clips. Once you start you will see how easy it is.