Pretty Bold Move - the C63 19" OEMs I sold
#27
Super Member
Thread Starter
Your photos are no longer being displayed ![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
A 10mm spacer on a 54 offset with a 275 tire on the 63 wil chip off the outer rubber of the tire on the arch over bumpy roads and potholes
![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
A 10mm spacer on a 54 offset with a 275 tire on the 63 wil chip off the outer rubber of the tire on the arch over bumpy roads and potholes
#28
pics:
before:
![](http://i1133.photobucket.com/albums/m600/dmogull/Cars/20121211_132739.jpg)
after:
![](http://i1133.photobucket.com/albums/m600/dmogull/Cars/20130202_100538_zps4cdfa017.jpg)
![](http://i1133.photobucket.com/albums/m600/dmogull/Cars/20130202_100555_zps5c40803a.jpg)
![](http://i1133.photobucket.com/albums/m600/dmogull/Cars/20130202_100605_zps4b92a358.jpg)
![](http://i1133.photobucket.com/albums/m600/dmogull/Cars/20130202_100625_zps8641aa33.jpg)
#29
Super Member
Thread Starter
I'm not the biggest fan of black wheels but I do think they look nice on a white car and they're definitely a big improvement! Congrats buddy
Edit: Edit your signature
Edit: Edit your signature
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#30
thanks, Sam. going for the white/black theme on my car (which is why I was adamant to get a polar white coupe and had to contact multiple dealerships to find one that was already being built and allocated to them as I am very impulsive and did not want to wait 6 months+ to custom build one...I am working on this character defect lol).
good point on the signature, editing it now
good point on the signature, editing it now
Last edited by m3equals333; 02-03-2013 at 08:24 AM.
#31
MBWorld Fanatic!
Not a big fan of black wheels either, but the multispokes with polished edge look sexy on ur car Derek.
As I said, they would look much better & bigger with the right drop.
As I said, they would look much better & bigger with the right drop.
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
#32
MBWorld Fanatic!
5MM on an ET54 on the rear would probably be perfect....giving you an ET49
I'm just thinking in relation to my 19x10s with ET50 in the rear, which are perfect, for me, in terms of stance and no rubbing
10MM spacers in the rear will probably rub with compression, but no hurt in trying since you already got them
I'm just thinking in relation to my 19x10s with ET50 in the rear, which are perfect, for me, in terms of stance and no rubbing
10MM spacers in the rear will probably rub with compression, but no hurt in trying since you already got them
#33
Super Member
Thread Starter
Hello Robert,
I've received the paypal however did not get a confirmation of shipping address and I am a little concerned you've not replied to my email asking for your shipping address and also providing the additional information on the tires. I do hope you're OK and have had no emergency to deal with.
Please do let me know otherwise I am going to issue a full refund on paypal. I don't like holding on to people's money. Sorry bud. I will make sure you lose no money as a result of the paypal payment.
Thanks,
Sam
I've received the paypal however did not get a confirmation of shipping address and I am a little concerned you've not replied to my email asking for your shipping address and also providing the additional information on the tires. I do hope you're OK and have had no emergency to deal with.
Please do let me know otherwise I am going to issue a full refund on paypal. I don't like holding on to people's money. Sorry bud. I will make sure you lose no money as a result of the paypal payment.
Thanks,
Sam
#34
thanks, Meng, I have never owned a set of black rims and actually am very satisfied with the look.
Appreciate the insight Callmiro, good to know the 5mm should be good to go if the 10mm's don't work out in the back.
Appreciate the insight Callmiro, good to know the 5mm should be good to go if the 10mm's don't work out in the back.
#35
MBWorld Fanatic!
5mm spacers are not a good idea because they don't have a hubcentric ring - they are just flat discs.
The wheel is then mounted only on half of the hub.
That is why I only use spacers at least 10mm thick.
I hope I explained it clearly - I'm not sure if I used the correct wording.
The wheel is then mounted only on half of the hub.
That is why I only use spacers at least 10mm thick.
I hope I explained it clearly - I'm not sure if I used the correct wording.
#36
MBWorld Fanatic!
5mm spacers are not a good idea because they don't have a hubcentric ring - they are just flat discs.
The wheel is then mounted only on half of the hub.
That is why I only use spacers at least 10mm thick.
I hope I explained it clearly - I'm not sure if I used the correct wording.
The wheel is then mounted only on half of the hub.
That is why I only use spacers at least 10mm thick.
I hope I explained it clearly - I'm not sure if I used the correct wording.
You can find 5MM hub centric spacers pretty much anywhere as most local machine shops can cut a pair for you.
If you can't find them locally then these guys are your best bet
http://www.motorsport-tech.com/wheel_spacers.html
#37
cool, surprised H&R does make 5mm hubcentric spacers...is there a reason for this? should be decent weather here the next few days (nice weather = no snow/rain lol), so I am going to test out the 10mm's in the back this week sometime...going to try to hit up some train tracks or speed bumps
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
Last edited by m3equals333; 02-03-2013 at 05:14 PM.
#38
Super Member
Thread Starter
cool, surprised H&R does make 5mm hubcentric spacers...is there a reason for this? should be decent weather here the next few days (nice weather = no snow/rain lol), so I am going to test out the 10mm's in the back this week sometime...going to try to hit up some train tracks or speed bumps ![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
#39
I hear u Sam. Calipers being painted red today, so that will make em stand out just a touch more.
Thanks again for the great/honest deal bro...people should have 100% confidence when dealing with you and I hope your last couple (flawless) completed deals with myself and the other member are proof how much of a stand up guy and top notch guy u are
Thanks again for the great/honest deal bro...people should have 100% confidence when dealing with you and I hope your last couple (flawless) completed deals with myself and the other member are proof how much of a stand up guy and top notch guy u are
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Last edited by m3equals333; 02-04-2013 at 07:35 AM.
#40
Super Member
Thread Starter
Thank you for the kind words m3equals333 (Derek), I know 25 days is a long time to wait for some wheels shipped via sea from the other side of the world but they arrived there in good condition in the end and I must say you were one patient person to wait that long!
Red callipers to me are a little too common these days but again on a white car with black rims, I think they're really going to pop!
Hope you enjoy them and the tires don't get thrashed to pieces too soon!
Red callipers to me are a little too common these days but again on a white car with black rims, I think they're really going to pop!
Hope you enjoy them and the tires don't get thrashed to pieces too soon!
#41
Newbie
Join Date: Dec 2010
Location: St.Albert, Ab, Canada/Cathedral City, Ca
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
99 E55 AMG,2007 xlrv, 11C63
Can you ship to western Canada( Alberta) T8N4P6 and same price? I am interested in the 19's and Continentals. Thanks
#42
Super Member
Thread Starter
Hello Karkrzy,
Let me just check with the shipping company tomorrow (closed now) with regards to Alberta and see if the price comes out to around the same price.
Will let you know then.
Thanks
Let me just check with the shipping company tomorrow (closed now) with regards to Alberta and see if the price comes out to around the same price.
Will let you know then.
Thanks
#43
Senior Member
hey guys, little off topic but do you recommend painting caliper? I sold a kid a new C63C and he really wants red calipers. I was looking into G2 paint but people are telling me not to touch this car and that since the paint is already gloss the new paint won't stick. Suggestions??
Thank you.
Thank you.
#44
Super Member
Thread Starter
Painting callipers is no issue and many people do, and have done, it. There's actually a thread on here at the moment on the first page about painting callipers so have a read of that
#45
Senior Member