Mode Carbon Product Showcase – Featured Item: C63 Bootlid Spoiler
After the spoiler is removed, clean the area thoroughly. After removing the excess glue, etc. Do a final clean by prepping the trunk with alcohol before installing the new spoiler. I recommend doing a dry fit set up before exposing the tape. I put a centerline mark on the trunk and spoiler to match/align it during the dry fit. Once I got it centered, remove the tape and install. Be aware that the contact points are on two axis... The top and rear...you'll know what I mean once you see the spoiler. So practice during the dry fit.
By the way, Mode Carbon is the best product out there! Nicholas is a good guy, very responsive. I am considering an all Mode Carbon setup. I have the Splitter and Bootlid spoiler. Just need their diffuser...
I just love my car!! With the addition of the mode carbon pieces . We were at a driving day with all kinds of exotics ,our car was the most photographed car there. Wait till get those finale c f bits . Nick I can't wait!! THANKS John
Thread Starter
Joined: Apr 2012
Posts: 3,208
Likes: 174
From: USA
E90 M3, F80 M3, C63 507, F90 M5
Thread Starter
Joined: Apr 2012
Posts: 3,208
Likes: 174
From: USA
E90 M3, F80 M3, C63 507, F90 M5
Pics when installed?









