Today was dyno day
#1
Senior Member
Thread Starter
Join Date: Sep 2014
Location: Calgary, AB
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
2011 C63 AMG P31
Today was dyno day
well, today we didn't have much booked... So we tossed my summer tires on and decided to spin!
Im fairly pleased with the results, though I'd be happy with another 12hp to the wheels! The torque values are fairly low because the only tires I had were very bald and would chirp or skip here and there.
Here's a video of one pull:
Im fairly pleased with the results, though I'd be happy with another 12hp to the wheels! The torque values are fairly low because the only tires I had were very bald and would chirp or skip here and there.
Here's a video of one pull:
Last edited by ToXicXxX; 01-07-2015 at 08:28 PM.
#3
Senior Member
Thread Starter
Join Date: Sep 2014
Location: Calgary, AB
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
2011 C63 AMG P31
Agency power headers + mids, stock mufflers, ROW airboxes, K&N filters.
It was -12 today with about a foot of half melted snow on the ground... Clean is impossible right now. I basically put it up on the hoist, changed the wheels, blasted the bottom to get all the rocks and slush off.
#5
Senior Member
Thread Starter
Join Date: Sep 2014
Location: Calgary, AB
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
2011 C63 AMG P31
That I have not. We did dyno before the headers, but the dyno needed calibration and was generating nonsense values and curves.
I did actually get a few 500-505 pulls early on, but the graph wasn't stable.
I did actually get a few 500-505 pulls early on, but the graph wasn't stable.
Last edited by ToXicXxX; 01-07-2015 at 08:58 PM.