Foglight disconnect
12-02-2015, 12:22 PM
#1
Member
Thread Starter
Join Date: Jun 2012
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
09c63
Foglight disconnect
I have a 09 c63 and the foglights are starting to get on my nerves lol. Is there a way to have then completely off without telling me their out on the dash?
12-02-2015, 04:14 PM
#2
MBWorld Fanatic!
I'm interested to know this as well, although I don't think there's a way short of rigging some wiring. I find the fogs annoying as well. My left bulb burned out over a year ago and I purposefully didn't replace it yet.
12-02-2015, 04:48 PM
#3
Super Member
Regarding this issue.
I asked REVOZSPORT on what to do with the fog light delete on the factory bumper to switch over to the DTM/F1 bumper.
Only way to do this is running load resistors for No Error on the dash (Similar technique on those DEPO LED tail lights)
or
If you have access to STAR DAS (Developer Mode)
Control Units > Body > System Dr-Side SAM > Dr-Side SAM Signal Acquisition > Development data > Control Unit Adaptations > Control Unit Adaptations (Variant Coding) > Parameter Abbiegelicht > "Enable_Abbiegelicht" >>> Set to Nein
I asked REVOZSPORT on what to do with the fog light delete on the factory bumper to switch over to the DTM/F1 bumper.
Only way to do this is running load resistors for No Error on the dash (Similar technique on those DEPO LED tail lights)
or
If you have access to STAR DAS (Developer Mode)
Control Units > Body > System Dr-Side SAM > Dr-Side SAM Signal Acquisition > Development data > Control Unit Adaptations > Control Unit Adaptations (Variant Coding) > Parameter Abbiegelicht > "Enable_Abbiegelicht" >>> Set to Nein
