logging tools
05-31-2016, 08:22 PM
#1
MBWorld Fanatic!
Thread Starter
logging tools
I just brought a new toy
http://www.palmerperformance.com/sto...products_id=57
going to start data logging my car as weistec need some real time information
Check it out guys if you wanna do the same for your own records
http://www.palmerperformance.com/sto...products_id=57
going to start data logging my car as weistec need some real time information
Check it out guys if you wanna do the same for your own records
Last edited by mr747; 05-31-2016 at 08:51 PM.
The following users liked this post:
HYPERTUNE (06-01-2016)
05-31-2016, 08:51 PM
#3
MBWorld Fanatic!
Thread Starter
fixed
06-01-2016, 06:11 AM
#4
MBWorld Fanatic!
What is the difference between this and using a Bluetooth dongle and cellphone app? It looks like you need a laptop and a wired connection, but they do not offer enhanced capabilities for Mercedes. So, I am wondering whether this would show any more info than Torque or DashCommand.
06-01-2016, 06:34 AM
#5
MBWorld Fanatic!
Thread Starter
With this cable you can do full logging and see what your car is doing live via the lap top
when you purchase the cable you get the software also to do the logging
the app is good to check codes and stuff this just takes it to the next level
you don't need the extra software all you need to do is purchase the software and scan XL professional version and off you go
this would be good for the track also
I need this because my car is having issues with the throttle bodies and weistec want to know the car is doing under load
Trying to look at a phone is near impossible
when you purchase the cable you get the software also to do the logging
the app is good to check codes and stuff this just takes it to the next level
you don't need the extra software all you need to do is purchase the software and scan XL professional version and off you go
this would be good for the track also
I need this because my car is having issues with the throttle bodies and weistec want to know the car is doing under load
Trying to look at a phone is near impossible
06-01-2016, 07:36 AM
#6
MBWorld Fanatic!
With this cable you can do full logging and see what your car is doing live via the lap top
when you purchase the cable you get the software also to do the logging
the app is good to check codes and stuff this just takes it to the next level
you don't need the extra software all you need to do is purchase the software and scan XL professional version and off you go
this would be good for the track also
I need this because my car is having issues with the throttle bodies and weistec want to know the car is doing under load
Trying to look at a phone is near impossible
when you purchase the cable you get the software also to do the logging
the app is good to check codes and stuff this just takes it to the next level
you don't need the extra software all you need to do is purchase the software and scan XL professional version and off you go
this would be good for the track also
I need this because my car is having issues with the throttle bodies and weistec want to know the car is doing under load
Trying to look at a phone is near impossible
06-01-2016, 07:39 AM
#7
Senior Member
I have been using ScanXL Professional for a while & it has been somewhat helpful.
Pros: Easy to configure & use, reliable, good single-key capturing.
Cons: Not AMG-friendly (no enhanced features), limited PIDs (like no knock detection values), poor support.
I am happy to share my config files etc ... PM me if you want them. (Brad: I'll bring mine on Sunday if it helps).
Pros: Easy to configure & use, reliable, good single-key capturing.
Cons: Not AMG-friendly (no enhanced features), limited PIDs (like no knock detection values), poor support.
I am happy to share my config files etc ... PM me if you want them. (Brad: I'll bring mine on Sunday if it helps).
Trending Topics
06-01-2016, 09:27 AM
#8
I've had that for a couple years, it works good but it is slow to respond, there is a slight delay. Shows lots of values, throttle position, timing, fuel trims, temps, etc etc
The following users liked this post:
medamullet (06-02-2016)
06-01-2016, 09:33 PM
#13
MBWorld Fanatic!
Thread Starter
I use HPTuners MPVI scanner and a separate wideband sensor.
http://vcmstore.com.au/collections/w...jet-wideband-2
http://vcmstore.com.au/collections/w...jet-wideband-2
on sunday
06-01-2016, 11:31 PM
#14
With this cable you can do full logging and see what your car is doing live via the lap top
when you purchase the cable you get the software also to do the logging
the app is good to check codes and stuff this just takes it to the next level
you don't need the extra software all you need to do is purchase the software and scan XL professional version and off you go
this would be good for the track also
I need this because my car is having issues with the throttle bodies and weistec want to know the car is doing under load
Trying to look at a phone is near impossible
when you purchase the cable you get the software also to do the logging
the app is good to check codes and stuff this just takes it to the next level
you don't need the extra software all you need to do is purchase the software and scan XL professional version and off you go
this would be good for the track also
I need this because my car is having issues with the throttle bodies and weistec want to know the car is doing under load
Trying to look at a phone is near impossible
06-02-2016, 11:18 AM
#15
I use HPTuners MPVI scanner and a separate wideband sensor.
http://vcmstore.com.au/collections/w...jet-wideband-2
http://vcmstore.com.au/collections/w...jet-wideband-2
I tune imports and use Open Source software I connect my LM-2 http://www.innovatemotorsports.com/products/lm2.php with other peoples cars and the LC-1 http://www.innovatemotorsports.com/products/db.php with my personal car. (not my MB) It isn't the best wideband I have used, but it connects to my software so it's easy to read the logs with matched AF to all the other parameters. I wish the MB world was more shareware with software. I've been searching for some good logging software. I just wish I was able to actually tune it myself.
06-02-2016, 11:42 AM
#16
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,044
Received 2,810 Likes
on
1,664 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Agree ^
Love my Innovate DLG-1 Dual AFR Gauge, although one of the sensors has gone out of calibration and is giving me funky readings on one bank. Stalking this thread for ideas on how to log AFR's....
Love my Innovate DLG-1 Dual AFR Gauge, although one of the sensors has gone out of calibration and is giving me funky readings on one bank. Stalking this thread for ideas on how to log AFR's....
06-04-2016, 12:51 AM
#17
MBWorld Fanatic!
the stock primary oxygen sensors are widebands so unless you're trying to verify that one is reading properly there's really no need for an external wideband.
