Installed H&R Sport Springs - One corner lower than others
Thread Starter
Junior Member
Joined: May 2012
Posts: 46
Likes: 1
2012 C63 AMG
Installed H&R Sport Springs - One corner lower than others
So I installed a set of H&R sport springs on my 2012 C63 AMG a few weeks ago. Was running the stock wheels, and didn't notice any issues (other than it pulling to the right, but I was waiting on my new wheels to show up before I got an alignment)
My 19" Forgestars finally showed up and I mounted them yesterday. Drove it last night, had a passenger in the right rear and noticed rubbing when we went over bumps (from the back right) - normal driving seemed fine.
Inspected it today and it looks like the right rear is a good 1/4-1/2" lower than the others.
I'm scratching my head as to what I could have screwed up since the rears were fairly straight forward.
Before I take it all apart again to take a look, anyone have any ideas? Is it maybe the other springs haven't settled in yet?
These photos are from back left and back right.
Thanks!
My 19" Forgestars finally showed up and I mounted them yesterday. Drove it last night, had a passenger in the right rear and noticed rubbing when we went over bumps (from the back right) - normal driving seemed fine.
Inspected it today and it looks like the right rear is a good 1/4-1/2" lower than the others.
I'm scratching my head as to what I could have screwed up since the rears were fairly straight forward.
Before I take it all apart again to take a look, anyone have any ideas? Is it maybe the other springs haven't settled in yet?
These photos are from back left and back right.
Thanks!
