C63 AMG (W204) 2008 - 2015

What offset for wheels? 13 c63 amg w/ p31 package

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-09-2017, 04:18 PM
  #1  
Member
Thread Starter
 
Belmin07's Avatar
 
Join Date: Jul 2017
Posts: 142
Received 2 Likes on 2 Posts
13 c63 AMG
Talking What offset for wheels? 13 c63 amg w/ p31 package

Hello, Everyone!

I have a 2013 C63 amg sedan w/ p31 package and was looking to purchase some new wheels. I was either looking at 18" or 19" Niche Targas and was wondering what offset is good for our vehicles. Also, the pattern for our vehicles is 5x112 correct? I would appreciate some feedback!

Thank you so much and hope everyone has a wonderful Monday
Old 10-09-2017, 05:14 PM
  #2  
MBWorld Fanatic!
 
bhamg's Avatar
 
Join Date: Aug 2009
Posts: 2,899
Received 92 Likes on 81 Posts
C63 AMG
For 8.5" F and 10" R widths standard rub-free offsets are ET40 F and ET52 R.
The following users liked this post:
Belmin07 (10-09-2017)
Old 10-09-2017, 05:27 PM
  #3  
Member
Thread Starter
 
Belmin07's Avatar
 
Join Date: Jul 2017
Posts: 142
Received 2 Likes on 2 Posts
13 c63 AMG
Originally Posted by bhamg
For 8.5" F and 10" R widths standard rub-free offsets are ET40 F and ET52 R.
I'm looking at 18x9.5 niche targas with a +50.00mm offset for rear and 18x8.0 with a +42.00mm offset for front. Would that work with no rubbing? Thanks so much for your help!
Old 10-09-2017, 05:59 PM
  #4  
MBWorld Fanatic!
 
bhamg's Avatar
 
Join Date: Aug 2009
Posts: 2,899
Received 92 Likes on 81 Posts
C63 AMG
Originally Posted by Belmin07
I'm looking at 18x9.5 niche targas with a +50.00mm offset for rear and 18x8.0 with a +42.00mm offset for front. Would that work with no rubbing? Thanks so much for your help!
The front would be fine though that's going 2mm in the wrong direction aesthetically. Inconsequential, just sayin'. 50mm R works fine for some, perhaps most here. For me, on coilovers with conservative settings (approx 3/4" lowering) I had some severe bottoming on the inner liner on compression dips that would shave a bit of tire rubber but no rubbing at all in benign road conditions. That was on 275 PSS which is a wide tire across the tread. Some are fine with that kind of occasional contact, but I wasn't so I had the wheels put on a lathe to get to ET52.

Last edited by bhamg; 10-09-2017 at 07:14 PM.
Old 10-09-2017, 07:20 PM
  #5  
MBWorld Fanatic!
 
bhamg's Avatar
 
Join Date: Aug 2009
Posts: 2,899
Received 92 Likes on 81 Posts
C63 AMG
Originally Posted by Belmin07
I'm looking at 18x9.5 niche targas with a +50.00mm offset for rear and 18x8.0 with a +42.00mm offset for front. Would that work with no rubbing? Thanks so much for your help!
Never mind, I see you have 9.5" R. Perfect, no rubbing IMO.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: What offset for wheels? 13 c63 amg w/ p31 package



All times are GMT -4. The time now is 04:53 AM.