M156 vibration at Idle
#1
Junior Member
Thread Starter
M156 vibration at Idle
Hello,
I’m having an issue with a moderate vibration in the cabin. It occurs during cold start up/idle then progressively increases vibration when put into gear. Upon accelerating it evens out. I do have a CEL that reads (Bank 1 Lean). Standing outside the vibration is not audible even with the hood open. Has anyone had this issue?
Motor Mounts?
I’m having an issue with a moderate vibration in the cabin. It occurs during cold start up/idle then progressively increases vibration when put into gear. Upon accelerating it evens out. I do have a CEL that reads (Bank 1 Lean). Standing outside the vibration is not audible even with the hood open. Has anyone had this issue?
Motor Mounts?
#3
Junior Member
Thread Starter
thanks.
So the lean code turns on and off intermittently. I installed new afe pro dry filters a couple weeks ago thinking that maybe the old filters were messing with the MAF sensors. I deleted the code and it came back on 2 days later.
So the lean code turns on and off intermittently. I installed new afe pro dry filters a couple weeks ago thinking that maybe the old filters were messing with the MAF sensors. I deleted the code and it came back on 2 days later.
#5
Junior Member
Thread Starter
The following users liked this post:
BLKROKT (04-06-2019)