silaciC63

Recently purchased a PFL C63, but the previous owner had retrofitted the FL front end (hood, headlights, bumper).
The issue I see is that the bumper side opening no longer aligns with the PFL auxiliary oil cooler duct, which is now mostly blocked off by the bumper.
The FL do seem to have a different air duct, but I found several part nb and I'm not sure which is what.

The two most likely part nb I found are: 2045000916 and 2045000016
Is it really a 2-piece duct or am I looking in the wrong place?

Any help would be appreciated.

silaciC63

Bump, anyone?

deadlyvt

The coolers are the same pfl to fl... only the 440 option changes the cooler to the bs. Tons of threads on this if you search

silaciC63

Not asking about the oil cooler, I know they are the same on PFL and FL. The duct is not and there's no info/part nb on this.

Here's a pic to illustrate the issue. Notice how the air duct is almost completely blocked off by the FL bumper.

BLKROKT

Your grill shouldn’t have all that plastic blocking it. Just take the bumper off and cut or Dremmel out all that stuff.