MBWorld.org Forums

C63/C63S AMG
Sponsored by:
Sponsored by:

Rear bumper side fins

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 01-10-2018 | 09:48 AM
  #51  
FDNewbie's Avatar
FDNewbie
Super Member
 
Joined: Oct 2015
Posts: 782
Likes: 105
From: Tampa, FL
'17 AMG C63S Edition 1 Coupe, '18 AMG C63S Convertible, '19 AMG GLS63
Originally Posted by westwest888
They're only functional in evacuating high pressure from the rear wheel well if they're open. The honeycomb style are closed. You'd also need to take a utility knife and carve a ventilation slot in the rear wheel liner.
Agreed. Wondering if anyone's opened these up? I'm considering doing it on my ED1...
Reply Like
The following users liked this post:
Jimmy_c63s (12-13-2019)
Old 01-10-2018 | 12:24 PM
  #52  
H20 MRV's Avatar
H20 MRV
Member
 
Joined: Jun 2012
Posts: 148
Likes: 4
From: Edinburgh
C63 - Golf Tdi
here on ebay uk

https://www.ebay.co.uk/itm/Mercedes-...19.m1438.l2649
Reply Like
Old 01-10-2018 | 09:31 PM
  #53  
fledda's Avatar
fledda
Junior Member
 
Joined: Aug 2010
Posts: 58
Likes: 2
Mercedes Benz SL63, C63S, Jeep SRT8
check this out: https://www.ebay.com/itm/FOR-15-18-M...BaVnJ9&vxp=mtr
Reply Like
Old 05-03-2018 | 09:47 AM
  #54  
dboey's Avatar
dboey
Junior Member
 
Joined: Sep 2017
Posts: 53
Likes: 4
AMG C43 Sedan
Originally Posted by fledda
I bought this and the quality is good but I have a problem of removing the original mess in order to install the vent. Anyone care to share how to remove the original mess. Thank you.
Reply Like
Old 05-03-2018 | 10:35 AM
  #55  
fledda's Avatar
fledda
Junior Member
 
Joined: Aug 2010
Posts: 58
Likes: 2
Mercedes Benz SL63, C63S, Jeep SRT8
Originally Posted by dboey
I bought this and the quality is good but I have a problem of removing the original mess in order to install the vent. Anyone care to share how to remove the original mess. Thank you.
Just pull out the mesh griil. It is snapped into place. A small hook should help.
Reply Like
The following users liked this post:
dboey (05-03-2018)
Old 05-03-2018 | 11:11 AM
  #56  
KJ's Avatar
KJ
Super Member
 
Joined: Nov 2009
Posts: 601
Likes: 113
2020 GLE 53 AMG
RW Carbon sells this as well.

https://www.rwcarbon.com/154/14/0/98...splitters.html
Reply Like
Old 05-03-2018 | 11:22 AM
  #57  
dboey's Avatar
dboey
Junior Member
 
Joined: Sep 2017
Posts: 53
Likes: 4
AMG C43 Sedan
Originally Posted by KJ
Many in the market, depending on how much you want to spend on it.
Reply Like
Old 05-03-2018 | 04:51 PM
  #58  
amalgam's Avatar
amalgam
Member
 
Joined: Oct 2017
Posts: 188
Likes: 3
From: CA
W213 E63
Is it the same part for coupes as sedans?
Reply Like
Old 05-05-2018 | 10:42 PM
  #59  
Andre Baracat's Avatar
Andre Baracat
Member
 
Joined: Mar 2018
Posts: 79
Likes: 8
From: Miami / FL
2018 C63S Coupe
Can anyone confirm if the sedan part will fit the coupe? I can't seem to find it for the coupe on eBay
Reply Like
Old 05-06-2018 | 03:55 AM
  #60  
dboey's Avatar
dboey
Junior Member
 
Joined: Sep 2017
Posts: 53
Likes: 4
AMG C43 Sedan
Thumbs up
Originally Posted by Andre Baracat
Can anyone confirm if the sedan part will fit the coupe? I can't seem to find it for the coupe on eBay
Do a search at eBay or you may conatct my seller at Bulbexpert@gmail.com. I got my fins at $80.99 including shipping and the quality is
Reply Like
Old 05-06-2018 | 07:41 AM
  #61  
Andre Baracat's Avatar
Andre Baracat
Member
 
Joined: Mar 2018
Posts: 79
Likes: 8
From: Miami / FL
2018 C63S Coupe
Originally Posted by dboey
Do a search at eBay or you may conatct my seller at Bulbexpert@gmail.com. I got my fins at $80.99 including shipping and the quality is
Thanks, but all I seem to find on eBay are sedan parts and my car is a coupe. I wanted the know if they fit both cars
Reply Like
Old 05-06-2018 | 07:53 AM
  #62  
FDNewbie's Avatar
FDNewbie
Super Member
 
Joined: Oct 2015
Posts: 782
Likes: 105
From: Tampa, FL
'17 AMG C63S Edition 1 Coupe, '18 AMG C63S Convertible, '19 AMG GLS63
Originally Posted by Andre Baracat
Can anyone confirm if the sedan part will fit the coupe? I can't seem to find it for the coupe on eBay
https://www.ebay.com/itm/W205-Carbon-Fiber-Rear-Bumper-Vent-Dress-Up-Kit-Pair-Fits-all-AMG-and-C63/123090011268?hash=item1ca8bc8484:g:9cwAAOSwtKVaVvN Y&vxp=mtr. Lists Coupe as one of the compatible parts, and has a 30 day return policy.
Reply Like
Old 05-06-2018 | 09:04 AM
  #63  
dboey's Avatar
dboey
Junior Member
 
Joined: Sep 2017
Posts: 53
Likes: 4
AMG C43 Sedan
Originally Posted by Andre Baracat


Thanks, but all I seem to find on eBay are sedan parts and my car is a coupe. I wanted the know if they fit both cars
I got the painted snap on fins and is designed for both sedan and coupe. Thank you.
Attached Files
File Type: pdf
scan.pdf (845.4 KB, 211 views)
Reply Like
Old 05-07-2018 | 12:35 AM
  #64  
amalgam's Avatar
amalgam
Member
 
Joined: Oct 2017
Posts: 188
Likes: 3
From: CA
W213 E63
Originally Posted by dboey
I got the painted snap on fins and is designed for both sedan and coupe. Thank you.
Please confirm once you receive them, I messaged one of the sellers and they said it will not fit?
Reply Like
Old 05-07-2018 | 01:42 AM
  #65  
dboey's Avatar
dboey
Junior Member
 
Joined: Sep 2017
Posts: 53
Likes: 4
AMG C43 Sedan
Originally Posted by amalgam
Please confirm once you receive them, I messaged one of the sellers and they said it will not fit?
The parts that I purchased is compatible with 37 vehicles. Kindly see my attached compatible list.

Reply Like
Old 05-14-2018 | 05:11 PM
  #66  
Yoyo43's Avatar
Yoyo43
Newbie
 
Joined: May 2017
Posts: 13
Likes: 0
AMG C43 sedan
Originally Posted by dboey
The parts that I purchased is compatible with 37 vehicles. Kindly see my attached compatible list.

are they suppose to boldging out so much?? Looks very weird.

Looks awakard. Shouldn’t it be in-line with the bumper?
Reply Like
Old 05-14-2018 | 05:23 PM
  #67  
amalgam's Avatar
amalgam
Member
 
Joined: Oct 2017
Posts: 188
Likes: 3
From: CA
W213 E63
Dont think so, take another photo further away

Originally Posted by Yoyo43


are they suppose to boldging out so much?? Looks very weird.

Looks awakard. Shouldn’t it be in-line with the bumper?
Reply Like
Old 05-14-2018 | 09:00 PM
  #68  
Yoyo43's Avatar
Yoyo43
Newbie
 
Joined: May 2017
Posts: 13
Likes: 0
AMG C43 sedan
I didn’t bother installing. Looks ok far away. But funky close up. If anyone could post a close up picture of the actual oem, ty.
Reply Like
Old 05-14-2018 | 10:15 PM
  #69  
fledda's Avatar
fledda
Junior Member
 
Joined: Aug 2010
Posts: 58
Likes: 2
Mercedes Benz SL63, C63S, Jeep SRT8
I think it is ok. Take a picture from the side of the car.
Reply Like
Old 05-15-2018 | 02:52 PM
  #70  
Yoyo43's Avatar
Yoyo43
Newbie
 
Joined: May 2017
Posts: 13
Likes: 0
AMG C43 sedan
Originally Posted by fledda
I think it is ok. Take a picture from the side of the car.
From side view, it is the same as advertised everywhere. Just the top view looks funky.
Reply Like
Old 05-15-2018 | 04:08 PM
  #71  
amalgam's Avatar
amalgam
Member
 
Joined: Oct 2017
Posts: 188
Likes: 3
From: CA
W213 E63
When I asked a couple sellers on ebay, they said coupes and sedans are different... Not sure if that could be a reason why? Does anyone have the part numbers for these flics?
Reply Like
Old 06-27-2018 | 04:39 AM
  #72  
Andy74's Avatar
Andy74
MBWorld Fanatic!
 
Joined: May 2018
Posts: 1,177
Likes: 222
W205 2015
Originally Posted by PA11LDH
There are no instructions with them but honestly, you can't do them wrong.


There are 4 parts in total - inner piece L & R, gloss black outer cover L & R


The inner pieces screw onto the bumper and then once secured the gloss black outer attaches using the 3M tape already applied.


The inner pieces have pre-drilled holes and in the kit are the screws and plastic 'rawl plug' type inserts - hold the inner piece in place on the bumper and mark the holes - it only fits in one place as it is shaped to fit into the moulded bumper perfectly.


Drill the holes, push in the inserts and screw the inner piece on tightly - once it is secured peel off the 3M tape from the gloss black outer and attach - it is best to trial fit these first before removing the tape as you only get one chance at getting them to fit and there is a little movement on fitment.


They literally take about 10 mins a side to fit
MB dealer wants to remove my rear bumper to install these flics. He says its a 3 hrs job. I am confused.
Reply Like
Old 06-27-2018 | 05:10 AM
  #73  
mercteil's Avatar
mercteil
Former Vendor of MBWorld
 
Joined: Aug 2013
Posts: 99
Likes: 9
From: Europe
G Wagon
Originally Posted by amalgam
When I asked a couple sellers on ebay, they said coupes and sedans are different... Not sure if that could be a reason why? Does anyone have the part numbers for these flics?
Coupe and Sedan flics are different, as bumpers are different. These come as a set.
Sedan flics: A2058805803
Coupe flics: A2058809903


We can offer it for 220 EUR including delivery costs.
Reply Like
The following users liked this post:
AMG C43 3LV6 (10-20-2018)
Old 07-03-2018 | 04:07 AM
  #74  
FDNewbie's Avatar
FDNewbie
Super Member
 
Joined: Oct 2015
Posts: 782
Likes: 105
From: Tampa, FL
'17 AMG C63S Edition 1 Coupe, '18 AMG C63S Convertible, '19 AMG GLS63
Originally Posted by mercteil
Coupe and Sedan flics are different, as bumpers are different. These come as a set.
Sedan flics: A2058805803
Coupe flics: A2058809903


We can offer it for 220 EUR including delivery costs.
OEM only? Or you carry them in CF as well?
Reply Like
Old 07-03-2018 | 04:21 AM
  #75  
mercteil's Avatar
mercteil
Former Vendor of MBWorld
 
Joined: Aug 2013
Posts: 99
Likes: 9
From: Europe
G Wagon
Originally Posted by FDNewbie
OEM only? Or you carry them in CF as well?
We offer genuine parts only, Mercedes offers it in plastic. I believe CF version exists in aftermarket, but we don't offer after market parts.
Reply Like
The following users liked this post:
dboey (07-03-2018)


You have already rated this thread Rating: Thread Rating: 0 votes, average.
Show Printable Version
Email this Page

Advanced Search
Quick Reply: Rear bumper side fins


Reply Closed Thread Share

All times are GMT -4. The time now is 11:05 AM.