Our DYNO is up and running
#1
Former Vendor of MBWorld
Thread Starter
Our DYNO is up and running
We have spent the last year putting together the best chassis dyno in the country. Our dyno is available for rent by the hour or the day and is available to groups as well. It is available 24 hours a day 7 days a week.
A few facts about our dyno-
We were searching for a dyno to do testing in Southern California and we couldn't find anything that worked for us. That's when we decided to build our own. Now if you are in Southern California you have access to a dyno that can handle all of your needs.
Come by anytime that you would like to check the new dyno out and we are accepting appointments now.
A few facts about our dyno-
- Mustang 4WD linked dyno
- Airspeed matches the cars speed on the dyno
- Soundproof room enclosure
- Climate controlled environment
- Clean air room
- Low rental cost
- All types of vehicles welcome
- We welcome other businesses to utilize the tool
We were searching for a dyno to do testing in Southern California and we couldn't find anything that worked for us. That's when we decided to build our own. Now if you are in Southern California you have access to a dyno that can handle all of your needs.
Come by anytime that you would like to check the new dyno out and we are accepting appointments now.
#3
MBWorld Fanatic!
This is awesome. Had a great experience there when we did a group dyno day. They even offered to let me re dyno when the car is fixed, still need to take them up on that once the headers are fixed. Awesome guys and place!!!!!!!
#4
Former Vendor of MBWorld
Thread Starter
It's $150/hour.
You can get a lot done in an hour. You will also get the most accurate readings of any chassis dyno in the country with our full speed wind tunnel to truly simulate road conditions.
You can get a lot done in an hour. You will also get the most accurate readings of any chassis dyno in the country with our full speed wind tunnel to truly simulate road conditions.
#5
Former Vendor of MBWorld
Thread Starter
You should see the new set up, the dyno has come a long way.
#6
What if I just want to know what the car is putting down with no tuning?
#7
Former Vendor of MBWorld
Thread Starter
Minmum time is 1 hour. That is what it takes to tie the car down, we can do 3 or 4 runs and then unstrap the car and you are all done. I can give you horsepower and torque as well as air/fuel on the graph.