famdeezy

Folks, I'm sorry if this topic has been beaten to death already but I need some help to figure out offsets for my soon to arrive C63S Coupe

I ended up putting a down payment on a set of wheels from Signature. The SV301s in polished black face, matte black barrel / lip and titanium hardware... the closest render I can find is attached here.

I'll be dropping it a little with KW HAS. Tires will be 275/30/20x10 front, 305/30/20x11 rear.

Thoughts?

Sanch

The company should help you with the offsets... or at least measure it up for you.

famdeezy

Thank you Snach, how wide are your rear wheels? and are you running 295 or 305 rear tires?

UGOTMOPPED

word..I wouldn't order from a company who didn't have the offsets spot on.

I think 305x30 will look way to bulky or chunky in the rear. U can run a 12 on that setup and it will still look thick.

AV1

Don't know what previous experience you or others here have had with aftermarket wheels, but what you'll discover is that most of them will not disclose the ET offsets of their wheels and they (offsets) also vary a lot from one application to the other even on the same vehicle from the same manufacturer, it's just the way it is with these aftermarket wheel companies.

Just tell them and order exactly what you want in terms of final fit/look result desired (ie stance, concavity, dish depth etc.) and they take it upon themselves to do the rest at their discretion - hopefully fingers crossed you end up with exactly what was expected.

It's always better if you've seen that exact wheel on the same vehicle and it's exactly what you desire then you just tell them to do exactly the same for your car - good luck

famdeezy

Thanks for the feedback guys, I'm looking to put on front 10j x 20 with 265/30/20 and rear 11j x 20 with 295/30/20. They can't guarantee this will work as they will need the car in the shop for measurements.

I will wait until I take delivery and have a tire shop take measurements to send to the manufacturer.