CL-Class (W215) 2000-2006: CL 500, CL 600

abc issues

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 01-25-2009, 12:39 AM
  #1  
Member
Thread Starter
 
droc112's Avatar
 
Join Date: Dec 2008
Posts: 80
Received 1 Like on 1 Post
cl600
abc issues

Hey everyone i have a major problem wit my abc system about a week ago i notice that i had some fluid on the ground i thought it was oil but it wasnt. Then i noticed that the abc message came on then adventually turned red The height was fine and when i would start it up i can hear the motor wining raising the car up but now i dont hear the motor at all and car is low and that the abc height adjustment feature isn't working It's low on the driver side and up on the passenger side. Does this sound like a high pressure line hose burst and burnt the motor up? (HOPE NOT!!!) when i start the car up it doesn't raise up at all and now the message is saying stop driving the car is to low. Can someone help me out on this one i been reading everyone horror stories!!! It's a 02 cl600 wit 60,000 miles i just recently brought it and was going to buy a extended warranty but now this happens!! I'm havin it towed on monday to my mechanic who works on foreign and german cars i didn't wanna take it to the MB crooks! Could someone give me a least worse case scenario and a worst case thanks
Old 01-26-2009, 10:15 AM
  #2  
Super Member
 
~CL500~'s Avatar
 
Join Date: Oct 2005
Location: Northern NJ
Posts: 584
Likes: 0
Received 3 Likes on 2 Posts
E90 N54 & W251
I hate to point out the obvious, but you have an ABC fluid leak. It could be a hose or one of the components leaking. When you spot ABC fluid, you should immediately turn the car off. If your pump is fine, you could have easily damaged it due to lack of lubrication. Hopefully this isn't the case with you. Get it inspected to identify what's leaking and go from there. Good luck and hopefully it's not too much $$$.
Old 01-26-2009, 04:50 PM
  #3  
Member
Thread Starter
 
droc112's Avatar
 
Join Date: Dec 2008
Posts: 80
Received 1 Like on 1 Post
cl600
abc issues

thanks for the info it's in the shop now!!
Old 01-26-2009, 08:20 PM
  #4  
Senior Member
 
Patentmat's Avatar
 
Join Date: Oct 2007
Location: Davis
Posts: 415
Likes: 0
Received 0 Likes on 0 Posts
2004 CL55
Let us know the damage once its all said and done
Old 01-26-2009, 10:15 PM
  #5  
MBWorld Fanatic!
 
BlownV8's Avatar
 
Join Date: Aug 2003
Location: In my garage
Posts: 8,552
Received 1,069 Likes on 857 Posts
E55, GLS450, GL63, GLE350
Originally Posted by ~CL500~
I hate to point out the obvious, but you have an ABC fluid leak. It could be a hose or one of the components leaking. When you spot ABC fluid, you should immediately turn the car off. If your pump is fine, you could have easily damaged it due to lack of lubrication. Hopefully this isn't the case with you. Get it inspected to identify what's leaking and go from there. Good luck and hopefully it's not too much $$$.
Very good advice!
Old 02-02-2009, 09:13 PM
  #6  
Super Member
 
hcetzneb's Avatar
 
Join Date: Oct 2008
Location: Fairfield county, CT.
Posts: 860
Likes: 0
Received 3 Likes on 3 Posts
2004 Ran SRT-10,2007 S550,2016 E400c
Mb crooks HAHA thats a new one

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: abc issues



All times are GMT -4. The time now is 08:18 PM.