Mini Restorationhttp://farm4.staticflickr.com/3800/9542602900_5118b05f35.jpg
08-18-2013, 06:20 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2010
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
2004 E320
Mini Restorationhttp://farm4.staticflickr.com/3800/9542602900_5118b05f35.jpg
Just purchased a cl600 out of state and had it shipped in. Needs a windshield, oil cooler replacement, major buff, rims and some small picky stuff. Since its almost pouring oil the cooler is coming first.
08-18-2013, 06:24 PM
#2
Junior Member
Thread Starter
Join Date: Mar 2010
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
2004 E320
Let the fun begin...
Manifold is off
Here is the back of the oil cooler and the wonderful job someone did trying to save there *** sealing it from the outside.
Tear down is over and its time to order some parts.
Manifold is off
Here is the back of the oil cooler and the wonderful job someone did trying to save there *** sealing it from the outside.
Tear down is over and its time to order some parts.
08-21-2013, 12:16 PM
#3
Junior Member
Thread Starter
Join Date: Mar 2010
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
2004 E320
Pretty frustrated at the moment. Have had two cylinder head bolts break on me now. Clean threads and measured every bolt and they are all within spec. Just bit the bullet and ordered $350+ in new head bolts.
Have any of you reused your head bolts without issue?
Have any of you reused your head bolts without issue?
