Seat adjustment panel rattling
Thread Starter
Newbie
Joined: Apr 2017
Posts: 4
Likes: 0
2005 CL500
Seat adjustment panel rattling
So I thought I had the common issue with the seal adjustment wood trim rattling but after a few repairs the noise persists and it turns out the actual buttons are producing the noise. Do these just pop off so I can glue them to the stork? I don't want to brake anything!
Super Member
Joined: Oct 2010
Posts: 724
Likes: 41
From: UK
W215 CL500 2005
Don't know...never heard of the buttons rattling.
The two tabs usually break off the panel...but they can be glued (and screwed) back on to make a permanent fix...that got rid of my rattles.
The two tabs usually break off the panel...but they can be glued (and screwed) back on to make a permanent fix...that got rid of my rattles.
Thread Starter
Newbie
Joined: Apr 2017
Posts: 4
Likes: 0
2005 CL500
Yeah I repaired the tabs and the whole panel itself is no solid, but the buttons themselves (the two big 'seat' ones) are slightly loose which is where the rattle is coming from. Do they just pop off so can be glued back?
